ST1480ACDR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Line Driver or Receivers |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ST1480 |
| Pin Count | 8 |
| Operating Supply Voltage | 3.3V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 2.2mA |
| Data Rate | 15Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Half |
| Receiver Hysteresis | 30μV |
| Receive Delay-Max | 50 ns |
| Simplex/Duplex | Half Duplex |
| Transmit Delay-Max | 30 ns |
| Output Low Current-Max | 0.004A |
| Number of Transmitters | 1 |
| Height | 1.75mm |
| Length | 5mm |
| Width | 4.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ST1480ACDR Overview
This LED driver IC features an enhanced 8-SOIC (0.154, 3.90mm Width) package for driving common LEDs.In this package, the receiver is mounted in the Tape & Reel (TR) format.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.Power supply for this differential driver is 3V~3.6V.This electronic part can have?up to 1/1 eligible receivers/drivers on the field at once.?IC receiver has been designed primarily for applications operating at 0°C~70°C.Driver ICs with a supply voltage range of 3.3V can operate efficiently.It is packaged with 8 pinouts that are market standard for this particular transceiver.As the base part number ST1480 identifies the product type, temperature, package, etc., you can try searching with it to get more variants of this part.It is a 8-pin driver IC with enhanced power dissipation controls.A combination of optical transceiver downsizing and high-density Surface Mount mounting reduces the package size dramatically.Using this ic receiver, you were able to achieve a resolution of 1 bits.Typically, the resolution of this receiver is specified to be 1 bits.There is a voltage supply of 3.3V required in order for this transceiver module to be operated.It is possible to subcategoriLine Driver or Receiverse this rf transceiver module as Line Driver or Receivers.1 transmitters are present, which produce radio waves for the purpose of transmitting or sending data.
ST1480ACDR Features
Tape & Reel (TR) package
8 pin count
8 pins
ST1480ACDR Applications
There are a lot of STMicroelectronics ST1480ACDR Drivers/Receivers/Transceivers applications.
- Switches
- Metro access rings
- Broadcast application
- Desktop PC
- Indoor ad hoc meeting
- Remote controls
- Low power, low voltage systems
- Transmission stations
- Servers
- Car radio
