ST16C2450IQ48-F
| Parameters | |
|---|---|
| Package / Case | TQFP |
| Surface Mount | YES |
| Number of Pins | 48 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 48 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Subcategory | Serial IO/Communication Controllers |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 48 |
| Power Supplies | 3.3/5V |
| Temperature Grade | INDUSTRIAL |
| Number of Channels | 2 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.97V |
| Nominal Supply Current | 3mA |
| uPs/uCs/Peripheral ICs Type | SERIAL IO/COMMUNICATION CONTROLLER, SERIAL |
| Data Rate | 1.5 Mbps |
| Address Bus Width | 3 |
| Boundary Scan | NO |
| Low Power Mode | NO |
| External Data Bus Width | 8 |
| Number of Serial I/Os | 2 |
| Data Transfer Rate-Max | 0.1875 MBps |
| Communication Protocol | ASYNC, BIT |
| Data Encoding/Decoding Method | NRZ |
| Length | 7mm |
| Width | 7mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
ST16C2450IQ48-F Overview
The TQFP package is the most cost-effective.UART is possible to transmUART on 2 channels.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used for the uPs, uCs, and peripheral ICs on the board.48 terminations are used as parts of its configuration.In order to operate it, a supply voltage of 5V is required.In order to communicate data, there are 2 serial I/Os.An IC with 48 pins is what this device is.UART falls under the subcategory of Serial IO/Communication Controllers because of a series of similarUARTies.UART is recommended that the operating temperature does not exceed -40°C to ensure long-term, normal performance.To maintain normal work for a long time, the operating temperature should not exceed 85°C.The 48 pins form the basis for its configuration.UART is possible to ensure reliabilUARTy when the supply voltage is kept below 5.5V.UART is important to keep the supply voltage above 2.97V in order to ensure reliabilUARTy.Providing 3.3/5V power supplies is reliable and efficient for electronic designers.
ST16C2450IQ48-F Features
2 serial I/Os
Power supplies of 3.3/5V
ST16C2450IQ48-F Applications
There are a lot of Exar Corporation ST16C2450IQ48-F UARTs applications.
- DTE for Modem Communication Systems
- Portable Appliances
- White goods
- Handheld Computers
- Wireless Infrared Data Communications Systems
- Industrial computing
- Universal PCI Bus Add-in Card
- Cellular Phones DataPort
- Portable Applications
- Router C ontrol
