ST16C2550CJ44-F

5V V 4.57mm mm 16.5862mm mm 70°C °C Interface - UARTs (Universal Asynchronous Receiver Transmitter) 16.5862mm mm CMOS 44 260

Manufacturer: MaxLinear, Inc.
Nocochips NO: 493-ST16C2550CJ44-F
Package: 44-LCC (J-Lead)
Datasheet: PDF
Stock: 134
Description: 5V V 4.57mm mm 16.5862mm mm 70°C °C Interface - UARTs (Universal Asynchronous Receiver Transmitter) 16.5862mm mm CMOS 44 260 (Kg)

Inquiry Now

Details

Tags

Parameters
Factory Lead Time	1 Week
Mounting Type	Surface Mount
Package / Case	44-LCC (J-Lead)
Surface Mount	YES
Packaging	Tube
JESD-609 Code	e3
Feature	Internal Oscillator, Timer/Counter
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	44
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATES AT 3.3V SUPPLY
HTS Code	8542.31.00.01
Technology	CMOS
Voltage - Supply	2.97V~5.5V
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	1.27mm
Time@Peak Reflow Temperature-Max (s)	40
JESD-30 Code	S-PQCC-J44
Qualification Status	Not Qualified
Operating Temperature (Max)	70°C
Temperature Grade	COMMERCIAL
Number of Channels	2, DUART
uPs/uCs/Peripheral ICs Type	SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Clock Frequency	64MHz
Address Bus Width	3
Protocol	RS232, RS485
Boundary Scan	NO
Low Power Mode	NO
External Data Bus Width	8
Data Rate (Max)	4Mbps
Number of Serial I/Os	2
Data Transfer Rate-Max	0.5 MBps
Data Encoding/Decoding Method	NRZ
FIFO's	16 Byte
With False Start Bit Detection	Yes
Height Seated (Max)	4.57mm
Length	16.5862mm
Width	16.5862mm
RoHS Status	RoHS Compliant

ST16C2550CJ44-F Overview

There is a cost-effective 44-LCC (J-Lead) package available for this product.In order to transmit data, there are 2, DUART channels available.In terms of packaging, Tube is used.The type SERIAL IO/COMMUNICATION CONTROLLER, SERIAL is used to identify the uPs/uCs/Peripheral ICs on the board.There are 44 terminations used in its configuration.To operate it, 5V is provided as the supply voltage.The status of this electronic part is currently Active.In order to communicate data, there are 2 serial I/Os.You can mount it by using Surface Mount.During operation, the supply voltage is set to 2.97V~5.5V.Its clock frequency is measured at 64MHz.There are some characteristics of Internal Oscillator, Timer/Counter in it.UART can operate at a maximum temperature of 70°C.Additionally, it can perform ALSO OPERATES AT 3.3V SUPPLY.