ST1CC40DR
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Lighting, Signage |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 12V |
| Base Part Number | ST1CC40 |
| Number of Outputs | 1 |
| Max Output Current | 3A |
| Max Supply Voltage | 18V |
| Min Supply Voltage | 3V |
| Power Dissipation | 2W |
| Output Current | 3A |
| Max Supply Current | 2.5mA |
| Max Output Voltage | 18V |
| Topology | Step-Down (Buck) |
| Min Input Voltage | 3V |
| Max Input Voltage | 18V |
| Output Current per Channel | 3A |
| Min Output Voltage | -1V |
| Max Output Power | 2W |
| Internal Switch(s) | Yes |
| Max Input Voltage (DC) | 18V |
| Min Input Voltage (DC) | 3V |
| Switching Frequency | 850kHz |
| Nominal Input Voltage (DC) | 12V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
ST1CC40DR Overview
Board space is saved by its 8-SOIC (0.154, 3.90mm Width) package.1 outputs are designed into LED drivers.To mount, use Surface Mount.DC DC Regulator emerges with high efficiency and reliability.-40°C~150°C TJ is a valid operating temperature for the led driver.The benefits of Lighting, Signage are considerable.In this case, the termination value is 8.To form its configuration, 8 pins are used.It has been mounted on Surface Mount.LED drivers can be found under the base part number ST1CC40.An acceptable maximum value for the supply voltage is 18V.According to its characteristics, it is also categorized into Display Drivers.It operates at a voltage of 3V as its minimal input voltage.As a result, it is designed to operate at a minimal voltage of 3V to ensure the most efficiency possible.Currently, the supply current can only reach 18V.This device is able to provide high efficiency when the maximal supply current should be less than 2.5mA.There is no current available to supply to the load.This electronic component may perform its functions fully if the switching frequency is maintained at 850kHz.When operating at the maximum output current of 3A, it is capable of providing all the benefits associated with LED drivers.The output voltage should not be in excess of 18V.-1V is the minimal voltage it outputs.
ST1CC40DR Features
Available in the 8-SOIC (0.154, 3.90mm Width) package
Operating temperature of -40°C~150°C TJ
Supply voltage of 12V
Switching frequency of 850kHz
ST1CC40DR Applications
There are a lot of STMicroelectronics ST1CC40DR LED Driver ICs applications.
- LED Lightings for Inspection Devices
- Linear fluorescent
- LED Lighting PFCs, Linear Dimmable
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Scanners and Handy Terminals
- Architectural lighting
- Down lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Amusement Machines
- Flicker-free LED Lighting using R1580N
