Parameters |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
ST1S09 |
Function |
Step-Down |
Number of Outputs |
1 |
Efficiency |
90 % |
Output Voltage |
5V |
Output Type |
Adjustable |
Max Output Current |
2A |
Operating Supply Voltage |
6V |
Voltage - Input (Min) |
2.7V |
Input Voltage-Nom |
5V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Max Output Voltage |
5V |
Voltage - Output (Min/Fixed) |
0.8V |
Topology |
Buck |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
1.5MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Min Output Voltage |
800mV |
Voltage - Output (Max) |
5.22V |
Length |
3mm |
Width |
3mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 7 months ago) |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
6-VDFN Exposed Pad |
Number of Pins |
6 |
Weight |
21.092045mg |
Operating Temperature |
-30°C~85°C TJ |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
ECCN Code |
EAR99 |
Terminal Finish |
Matte Tin (Sn) - annealed |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.95mm |
ST1S09IPUR Overview
It uses the Tape & Reel (TR) package in order to optimize the performance of this voltage regulator. There are 6 terminations in this voltage regulator. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 6-VDFN Exposed Pad package. A total of 1 outputs are configured in this voltage regulator. There are output pins on this DC DC switching regulator that generate Adjustable output. Surface Mount-mounting is compatible with this switching regulator. Voltage regulators should be operated at -30°C~85°C TJ temperature while operating. This DC-DC switching regulator has a switching frequency of 1.5MHz. This voltage regulator is able to operate with the minimal input voltage of 2.7V. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.8V. A regulator with this 260 peak reflow temperature is essentially indestructible. To meet the operation requirements, voltage regulator is designed to provide 5V as the nominal input voltage. This voltage regulator is included in the Switching Regulator or Controllers subcategory. There is a DC/DC regulator in this family that belongs to the ST1S09 family. A voltage of 5V volts can be produced by voltage regulator. For switching regulator operation, 6 pins are used. The output voltage of this voltage regulator 12v should at least be set at 800mV volts at all times. For switching regulator maximum operation, dc to dc voltage regulator delivers 2A A. 5.22V's maximal output voltage allows adjusting voltage regulator to operate easily. The maximum output voltage of this regulator voltage is 5V. A harley voltage regulator operates with a 6V supply voltage.
ST1S09IPUR Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
Operating supply voltage of 6V
ST1S09IPUR Applications
There are a lot of STMicroelectronics ST1S09IPUR Voltage Regulators applications.
- Lathes
- Nuclear power plants
- seismic instrument power circuits
- Imported equipment
- Printing equipment
- Smoke prevention equipment
- Serial communication converter
- Plate bending machines
- Domestic water pumps
- Pipe bending machines