banner_page

ST1S10PHR

8 Terminals 2.5V 8-Pin ST1S10 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 900kHz Tape & Reel (TR) 8-SOIC (0.154, 3.90mm Width) Exposed Pad


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-ST1S10PHR
  • Package: 8-SOIC (0.154, 3.90mm Width) Exposed Pad
  • Datasheet: PDF
  • Stock: 277
  • Description: 8 Terminals 2.5V 8-Pin ST1S10 DC DC Voltage Regulator SWITCHING REGULATOR 1 Outputs 900kHz Tape & Reel (TR) 8-SOIC (0.154, 3.90mm Width) Exposed Pad (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 7 months ago)
Contact Plating Tin
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width) Exposed Pad
Number of Pins 8
Weight 540.001716mg
Manufacturer Package Identifier 7195016_D
Operating Temperature -40°C~125°C TJ
Packaging Tape & Reel (TR)
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Subcategory Switching Regulator or Controllers
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number ST1S10
Function Step-Down
Number of Outputs 1
Efficiency 90 %
Output Voltage 15.3V
Output Type Adjustable
Max Output Current 3A
Operating Supply Voltage 18V
Voltage - Input (Min) 2.5V
Input Voltage-Nom 12V
Analog IC - Other Type SWITCHING REGULATOR
Output Configuration Positive
Max Output Voltage 16.2V
Voltage - Output (Min/Fixed) 0.8V
Topology Buck
Control Mode CURRENT-MODE
Frequency - Switching 900kHz
Control Technique PULSE WIDTH MODULATION
Synchronous Rectifier Yes
Min Output Voltage 800mV
Voltage - Output (Max) 16.2V
Height 1.25mm
Length 5mm
Width 4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
ST1S10PHR Description

The ST1S10PHR is a high efficiency step-down PWM current mode switching regulator capable of providing up to 3 A of output current. The ST1S10PHR device operates either at a 900 kHz fixed frequency or can be synchronized to an external clock (from 400 kHz to 1.2 MHz). The high switching frequency allows the use of tiny SMD external components, while the integrated synchronous rectifier eliminates the need for a Schottky diode. The ST1S10 provides excellent transient response, and is fully protected against thermal overheating, switching overcurrent and output short-circuit. The ST1S10PHR is the ideal choice for point of load regulators or LDO pre-regulation.
ST1S10PHR Features

● Step-down current mode PWM regulator
● Output voltage adjustable from 0.8 V
● Input voltage from 2.5 V up to 18 V
● 2% DC output voltage tolerance
● Synchronous rectification
● Inhibit function
● Synchronizable switching frequency from 400 kHz up to 1.2 MHz
● Internal soft start
● Dynamic short-circuit protection
● Typical efficiency: 90%
● 3 A output current capability
● Standby supply current: max. 6 μA over temperature range
● Operative junction temp.: from -40 °C to 125 °C
ST1S10PHR Applications

● Consumer
◆ STB, DVD, DVD recorders, TV, VCR, car audio, LCD monitors
● Networking
◆ XDSL, modems, DC-DC modules
● Computer
◆ Optical storage, HD drivers, printers, audio/graphic cards
● Industrial and security
◆ Battery chargers, DC-DC converters, PLD, PLA, FPGA, LED drivers

Write a review

Note: HTML is not translated!
    Bad           Good