ST2041BDR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ST2041 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Output Current | 0A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
ST2041BDR Overview
Tape & Reel (TR) is the way it's packaged.It is included in the package 8-SOIC (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.It is possible to use 1 outputs in the lighting driver.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.It belongs to the family ST2041.It contains 8 terminations.The operation is performed through the 8 pins.Currently, the lighting driver has a total of 1 functions.In this case, the LED driving board can produce only 500mAV as its maximum output.It is possible to achieve a high level of efficiency with a supply voltage of 5V.The lighting driver is mounted in the way of Surface Mount.8 pins are connected to it in total.When this case is used, the output current is set to 0A.The maximum supply voltage is set to 5.5V.Normal operation requires a voltage above 2.7V for the supply voltage.This gadget uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT in this case.We offer 1 channels in total.
ST2041BDR Features
Supplied from 5V
1 channels
ST2041BDR Applications
There are a lot of STMicroelectronics ST2041BDR Power Switches ICs applications.
- Hot Swaps
- Portable Music Players
- Portable/Handheld Devices
- Smartphone and PDA
- Wireless Headsets
- Notebook PC
- Handheld Devices
- Mobile Communication Devices
- Hard Disk Drives
- Various applications equipped with buttons
