ST2044BDR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ST2044 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Voltage | 5.5V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 20μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ST2044BDR Overview
A Tape & Reel (TR) is used to package it.This package is included in 16-SOIC (0.154, 3.90mm Width).Mounting type Surface Mount is selected for the LED driving board.There is a General Purpose switch type associated with it.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.There is a default setting of 4 for output.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It belongs to the ST2044 family.A total of 16 terminations can be found in it.The operation is carried out using the 16 pins.There are 1 functions of the LED driver.The maximum output current is reduced to 500mA to meet the operation criteria.The supply voltage of 5.5V is conducive to high efficiency.The lighting driver is mounted in the direction of Surface Mount.The LED driving board is equipped with a total of 16 pins.It is set to 500mA in this case.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 2 available channels.In order to optimize the efficiency of the supply voltage, it should be set to 5.5V.This LED driving board can accept voltages up to 5.5V volts as an input.It requires 2.7V volts as the minimum input voltage.A total of 2 inputs are available.
ST2044BDR Features
Supplied from 5.5V
2 channels
ST2044BDR Applications
There are a lot of STMicroelectronics ST2044BDR Power Switches ICs applications.
- Solid State Drivers
- Portable Video Game Players
- Various applications equipped with buttons
- Low Voltage I/O System Power
- Storage (HDDs, SSDs)
- HDD and SSD
- Hot Swaps
- Portable GPS Device
- Wireless Modem Data Cards
- Smart Phones, Feature Phones
