ST2052BDR
| Parameters | |
|---|---|
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 10μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 4.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ST2052 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Output Voltage | 5.5V |
| Output Type | N-Channel |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 1 |
| Interface | On/Off |
ST2052BDR Overview
It is packaged in the form of a Tape & Reel (TR).This file is included in package 8-SOIC (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.A General Purpose switch type is owned by it.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.By default, it is set to output 2.Operation is based on a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.It belongs to the ST2052 family.A total of 8 terminations have been recorded.The operation is carried out using the 8 pins.Currently, there are 1 functions associated with the lighting driver.High efficiency is possible when the supply voltage is set to 3.3V.Surface Mount is mounted in the way.This LED driver is equipped with a total of 8 pins.There is 160mOhm resistance on the LED driver.As a result, the output current is set to 500mA.In this case, the analog IC is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.In order to achieve the best efficiency, the supply voltage should be set to 5.5V.The maximum input voltage is 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.
ST2052BDR Features
Supplied from 3.3V
Resistance of 160mOhm
1 channels
ST2052BDR Applications
There are a lot of STMicroelectronics ST2052BDR Power Switches ICs applications.
- Notebook PC
- Low Voltage I/O System Power
- HDD, SSD
- USB3.1 Power Delivery
- Telecom and Network Systems
- Hot Swap
- Set-Top Boxes
- Solid-State Drives
- USB Protection
- Set-top-box
