ST2054BD
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ST2054 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Voltage | 5.5V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 20μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ST2054BD Overview
It's?packaged?in?the way?of?a?Tube.Package 16-SOIC (0.154, 3.90mm Width) contains it.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the type of switch owned by it.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.In this LED driver, there are no outputs available.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts has been specified.The ST2054 family consists of this type.The termination count is 16.The 16 pins are used for the operation of the system.It contains 1 functions.Maximum output current falls to 500mA when operation criteria are met.Supply voltages of 3.3V allow for high efficiency.Surface Mount is mounted in the way.A total of 16 pins are included in this LED driver.This case has the output current set to 500mA.In this LED driving board, the analog IC POWER SUPPLY SUPPORT CIRCUIT is employed.We offer 2 channels in total.It is recommended to set the supply voltage to 5.5V for optimum efficiency.This LED driver can handle voltages up to 5.5V volts.As a minimum input voltage, it requires 2.7V volts.Inputs are provided at 2.
ST2054BD Features
Supplied from 3.3V
2 channels
ST2054BD Applications
There are a lot of STMicroelectronics ST2054BD Power Switches ICs applications.
- Hot Swaps
- Hot Swap
- Portable GPS Device
- Notebook PC
- Various applications equipped with buttons
- PC Cards
- Notebook and Tablet Computers
- Storage Drives
- USB Protection
- Solid State Drivers
