ST2054BDR
| Parameters | |
|---|---|
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Number of Inputs | 2 |
| Max Input Voltage | 5.5V |
| Turn-Off Delay Time | 40 ms |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 80m Ω |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 160mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ST2054 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Output Voltage | 5.5V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Nominal Supply Current | 20μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Turn On Delay Time | 20 ms |
ST2054BDR Overview
The package is in the form of a Tape & Reel (TR).This file is included in package 16-SOIC (0.154, 3.90mm Width).Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.It is recommended to set the temperature to -40°C~125°C TJ in order to ensure reliable operation.As a default, the output is set to 4.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts can be achieved by this LED driver.It comes under the family of ST2054.A total of 16 terminations can be found in it.It is necessary to use the 16 pins in order to operate the LED driver.The LED driver has 1 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.Using a voltage of 3.3V allows for high efficiency.Surface Mount is mounted in the way of this lighting driver.As a result, it has a total of 16 pins.The LED driver has 160mOhm resistance.This results in a 500mA output current.There is an analog input IC in this gadget, which is POWER SUPPLY SUPPORT CIRCUIT.In total, there are 2 channels available.Optimal efficiency requires a voltage of 5.5V.Voltage input is limited to 5.5V volts.The minimum input voltage is 2.7V volts.Inputs are provided at 2.
ST2054BDR Features
Supplied from 3.3V
Resistance of 160mOhm
2 channels
ST2054BDR Applications
There are a lot of STMicroelectronics ST2054BDR Power Switches ICs applications.
- Handheld Devices
- Storage (HDDs, SSDs)
- USB Power Distribution
- Hot Swap
- Portable/Handheld Devices
- Portable Video Game Players
- USB3.1 Power Delivery
- Wireless Modem Data Cards
- PDAs
- Portable GPS Device
