ST2129QTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-UFQFN |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Auto-Direction Sensing, Power-Off Protection |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Interface ICs |
| Max Power Dissipation | 500mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ST2129 |
| Pin Count | 10 |
| Output Type | Tri-State, Non-Inverted |
| Number of Channels | 2 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 1.65V |
| Propagation Delay | 145 ns |
| Quiescent Current | 3.5μA |
| Turn On Delay Time | 145 ns |
| Logic Function | Translator |
| Data Rate | 89Mbps |
| Interface IC Type | INTERFACE CIRCUIT |
| High Level Output Current | -60μA |
| Channel Type | Bidirectional |
| Low Level Output Current | 60μA |
| Supply Voltage1-Nom | 1.8V |
| Translator Type | Voltage Level |
| Voltage - VCCA | 1.65V~3.6V |
| Voltage - VCCB | 1.65V~5.5V |
| Height Seated (Max) | 0.55mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ST2129QTR Overview
There is an embedded version of it in package 10-UFQFN.Packaged in the way of Tape & Reel (TR).Level translators uses Tri-State, Non-Inverted as the output.There is a translator type of Voltage Level for this electrical device.A Surface Mount mounting method has been used for this electronic part.This electrical device has channel type Bidirectional.Level translators is -40°C~85°C TA at the operating temperature.The circuit's superior flexibility is achieved through the use of 1 circuits.To end a transmission line, there are 10 types of termination that can be used.Based on this base part number ST2129, its related parts can be identified.In order for it to operate, it needs to be powered by a voltage of 1.8V.With 10 pins, it is equipped with a minimal number of connections.The board has 10 pins.The maximum supply voltage is 5.5V.This device requires a minimum voltage of 1.65V.From 1.65V~3.6V, the supply rail of the VCCA is configured.1.65V~5.5V is the supply rail configuration on the VCCB.With the Surface Mount method, it is mounted.There are a total of 2 channels.This part is included in Other Interface ICs.There are no external factors that affect it, so it consumes 3.5μA quiescent current.Operating can ensure that Auto-Direction Sensing, Power-Off Protection is achieved.
ST2129QTR Features
10-UFQFN package
1 circuits
10 pin count
10 pins
ST2129QTR Applications
There are a lot of STMicroelectronics ST2129QTR voltage translators & level shifters applications.
- Printers and Other Peripherals
- Smartphone
- Desktop PC
- Extended Product-Change Notification
- Wearable Health and Fitness Devices
- Notebook
- Routers (Telecom Switching Equipment)
- Controlled Baseline
- PMBus
- General purpose I/O level shifting
