ST2S06BPQR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-VQFN Exposed Pad |
| Number of Pins | 12 |
| Weight | 21.99923mg |
| Operating Temperature | -30°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ST2S06 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Efficiency | 90 % |
| Voltage - Input (Max) | 5.5V |
| Output Voltage | 3.3V |
| Output Type | Adjustable |
| Max Output Current | 500mA |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 800mA |
| Max Output Voltage | 5.17V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Switcher Configuration | PUSH-PULL |
| Height Seated (Max) | 1mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ST2S06BPQR Overview
optimized performance is achieved by utilizing the Tape & Reel (TR) package in this voltage regulator. In this voltage regulator, there are a total of 12 terminations. There is a DUAL SWITCHING CONTROLLER type analog IC in this voltage regulator 12v that is used to convey analog signals. For space-saving purposes, this voltage regulator is available in the 12-VQFN Exposed Pad package. 2 outputs have been configured in the voltage regulator 12v. As you can see, this DC DC switching regulator generates Adjustable output on its output pins. A Surface Mount mounting is required for this switching regulator. Operating at -30°C~125°C TJ is the recommended temperature for adjusting voltage regulator's operation. There is a switching frequency of 1.5MHz for this voltage regulator 12v. Despite its low input voltage, this voltage regulator can operate. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to 0.8V. Featuring a 800mA output current, dc to dc voltage regulator offers maximum design flexibility. Voltage regulators' input voltage is limited to 5.5V. A regulator voltage's peak reflow temperature amounts to 260 being indestructible. Voltage regulator is designed to provide a nominal input voltage of 5V to meet the operation requirements. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. In this case, the DC/DC regulator belongs to the family ST2S06. Voltage can be produced at 3.3V volts by voltage regulator. The switching regulator operation is carried out by 12 pins. There should be at least a 800mV volt output voltage for this switching regulator in order to make it work properly. For switching regulator maximum operation, dc to dc voltage regulator delivers 500mA A. There is a maximum output voltage of 5.17V from this voltage regulator 12v.
ST2S06BPQR Features
2 outputs
Peak reflow temperature (Cel) of 260
12 pins
ST2S06BPQR Applications
There are a lot of STMicroelectronics ST2S06BPQR Voltage Regulators applications.
- Lathes
- Driver circuits
- Planers
- Surface processing equipment
- Radio equipment
- Sensitive electronic devices
- Analog precision reference circuits
- Drilling machines
- Sink circuits
- Medical monitoring systems
