ST3232EBTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 3V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ST3232 |
| Pin Count | 16 |
| Output Voltage | 13.2V |
| Power Supplies | 3.3/5V |
| Interface | RS-232 |
| Nominal Supply Current | 1mA |
| Logic Function | Receiver |
| Data Rate | 250kbps |
| Differential Output | NO |
| Protocol | RS232 |
| Input Characteristics | SCHMITT TRIGGER |
| Number of Drivers/Receivers | 2/2 |
| Receiver Number of Bits | 2 |
| Duplex | Full |
| Receiver Hysteresis | 500mV |
| Number of Drivers | 2 |
| Number of Transceivers | 1 |
| Receive Delay-Max | 50 ns |
| Height | 1.2mm |
| Length | 5.1mm |
| Width | 4.48mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ST3232EBTR Overview
This LED driver IC features an enhanced 16-TSSOP (0.173, 4.40mm Width) package for driving common LEDs.The receiver is packaged in a Tape & Reel (TR) package.Since this part is a Transceiver can transceiver, a number of solutions have been able to utiliTransceivere it for various purposes.Ideally, you should place this wide receiver on a Surface Mount-type PCB or development board.A differential driver like this uses 3V~5.5V of power.It is possible to have up to 2/2 receivers/drivers in use simultaneously with this electronic part.IC receiver has been designed primarily for applications operating at -40°C~85°C.Wide receiver can operate within the range of 3.3V supply voltages efficiently.Integrated into this wide receiver are 16 terminations that are used for driving and receiving signals from data.As a standard package, this transceiver comes with a 16-pin layout that follows the market standard.With the part number ST3232 identifying the product type, temperature, package, etc., you can search with it to see more variants.Wide receiver with enhanced power dissipation control, 16-pin.Optical transceiver package size is greatly reduced due to downsizing of the ICs and high-density Surface Mount mounting technologies.In most cases, the receiver will be specified with a 2-bit resolution.This driver IC is designed to operate from a 3.3/5V power supply.There are 1 transceivers implemented in this module isolated transceiver.The part is embedded with 2 drivers, so it can be used with 2 devices.There is a capabilWide receivery to deliver voltage at 13.2V wWide receiverh this device.
ST3232EBTR Features
Tape & Reel (TR) package
16 pin count
16 pins
3.3/5V power supply
ST3232EBTR Applications
There are a lot of STMicroelectronics ST3232EBTR Drivers/Receivers/Transceivers applications.
- Data center
- Wireless 3D game
- Satellite ground stations
- Remote controls
- Broadcast application
- Aircraft positioning
- Cell phones
- Shortwave receiver
- Wireless projection application for business talks
- Televisions
