ST3DV520QTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 56-WFQFN Exposed Pad |
| Number of Pins | 56 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 56 |
| Resistance | 5.5Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ST3DV |
| Pin Count | 56 |
| Number of Outputs | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
| Number of Circuits | 4 |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | VIDEO MULTIPLEXER |
| Operating Supply Current | 150μA |
| Nominal Supply Current | 150μA |
| Power Dissipation | 500mW |
| Propagation Delay | 250 ps |
| Turn On Delay Time | 9 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Bandwidth | 450MHz |
| Supply Current-Max (Isup) | 0.5mA |
| Turn-Off Delay Time | 8.5 ns |
| On-State Resistance (Max) | 7.5Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Current - Leakage (IS(off)) (Max) | 5μA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 9ns, 8.5ns |
| Channel-to-Channel Matching (ΔRon) | 500m Ω |
| Crosstalk | -45dB @ 250MHz |
| Voltage - Supply, Single (V+) | 3V~3.6V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ST3DV520QTR Overview
Packed in 56-WFQFN Exposed Pad, the electronic component is convenient for shipping overseas. The advanced packaging method Tape & Reel (TR) provides high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a ratio of 2:1. Operating temperature extended to -55°C~125°C TA. Totally, there are 56 terminations. A electrical component with 8 channels is capable of high-quality output. Powered by a 3.3V voltage supply, the electrical part should be switched on and run. Into the electrical component body are injected 56 pins. Unlike digital switches, these are based on SPDT switching circuits. This multiplexer is composed of 4 circuits. Look for analog switch ic variants by searching with ST3DV. Analog switches have 5.5Ohm internal resistance. The datasheets for the 56 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 3.6V. It is recommended to use 3V as the lowest voltage for the electrical part. This digital switch can be operated with a current of 150μA. The voltage required by this switch device is 3V~3.6V, draining from a single voltage supply. Integrated with an analog IC VIDEO MULTIPLEXER. 450MHz-bandwidths can be used to transfer data between multiplexers. The analog switch ics includes 16 outputs.
ST3DV520QTR Features
8 Channels
Switch Circuit: SPDT
150μA Supply Current
Bandwidth: 450MHz
ST3DV520QTR Applications
There are a lot of STMicroelectronics ST3DV520QTR Analog Switches & Multiplexers ICs applications.
- Cable PC
- Cable Modem
- Battery-powered systems
- Digital Cross-Connects
- Audio/video switches
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Precision data acquisition
- Microprocessor Controlled Analog Systems
- Isolation
- CSU
