STAC9200X5TAEB1X
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 48 |
| Published | 2004 |
| JESD-609 Code | e3 |
| Moisture Sensitivity Level (MSL) | 3 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 3.465V |
| Min Supply Voltage | 3.135V |
| Nominal Supply Current | 50mA |
| Resolution | 3 B |
| Sampling Rate | 192 ksps |
| Number of A/D Converters | 2 |
| Signal to Noise Ratio (SNR) | 100 dB |
| Length | 7mm |
| Width | 7mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
STAC9200X5TAEB1X Overview
A TQFP package is provided to save space. The high-efficiency performance of this electronic part can be achieved in various applications due to its type of General Purpose. There are 48 pins on this device. Using the Surface Mount technology, it is mounted to a PCB. It is recommended to maintain the maximum supply voltage at 3.465V. To convert analog signals into digital signals, there are 2 A/D converters. Supply voltage should be maintained at 3.135V. Operating voltage of 3.3V is possible. In order to maintain normal use, the operating temperature is set to 70°C. The operating temperature is set with the minimum value of 0°C to keep normal use. There is normally a current of 50mA flowing through the circuit at any given time.
STAC9200X5TAEB1X Features
Embedded in the TQFP package
2 A/D converters
STAC9200X5TAEB1X Applications
There are a lot of Integrated Device Technology (IDT) STAC9200X5TAEB1X CODECs Interface ICs applications.
- Galvanometer scanners
- Servo motors
- Linear measurement
- Steel mills
- RF-based home automation system
- High-performance memory systems
- Addition
- Dynamic applications
- Image search
- Packaging
