STAP08DP5XTTR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 16 |
| Weight | 172.98879mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Linear |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Backlight, Lighting |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STAP08 |
| Number of Outputs | 8 |
| Max Output Current | 100mA |
| Operating Supply Voltage | 3.3V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 16mA |
| Output Current | 100mA |
| Max Supply Current | 16mA |
| Max Output Voltage | 20V |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 100mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| Max Input Voltage (DC) | 5.5V |
| Min Input Voltage (DC) | 3V |
| Switching Frequency | 30MHz |
| Height | 1.05mm |
| Length | 5.1mm |
| Width | 4.5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
STAP08DP5XTTR Overview
16-TSSOP (0.173, 4.40mm Width) Exposed Pad package saves space on the board. LED drivers are designed with 8 outputs.The led driver mounting is done by using Surface Mount.It emergys as a Linear with high efficiency and reliable performance.LED drivers capable of operating at -40°C~125°C TJ can be used.Taking advantage of Backlight, Lighting has considerable benefits.The base of this board is configured as 16 pins.As you can see, it is mounted by Surface Mount.The LED driver is based on part number STAP08.There is no problem with the voltage of 5.5V.The device has a voltage output of 20V volts.It operates at a voltage of 3V as its minimal input voltage.The maximum efficiency can be achieved by operating it at a minimal voltage of 3V.The maximum supply current is reached when 5.5V is reached.When the maximum supply current is less than 16mA, this device is capable of providing high efficiency.The load is capable of receiving 100mA current.It is necessary to use 3.3V voltage to power systems.This electronic component may perform its functions fully if the switching frequency is maintained at 30MHz.When operating at the maximum output current of 100mA, it is capable of providing all the benefits associated with LED drivers.It is not recommended to exceed 20V in the output voltage.
STAP08DP5XTTR Features
Available in the 16-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Operating with the supply voltage of 3.3V
Switching frequency of 30MHz
STAP08DP5XTTR Applications
There are a lot of STMicroelectronics STAP08DP5XTTR LED Driver ICs applications.
- Replacement lamps
- Down lighting
- LED Lightings for Inspection Devices
- White LED Backlight for portable equipment
- High-end retail lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED backlight driver for LCD displays for portable equipment
- Down lights
- OLED power supply for portable equipment
- Amusement Machines
