STAP16DPPS05XTTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Number of Pins | 24 |
| Weight | 172.39345mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| ECCN Code | EAR99 |
| Type | Linear |
| Applications | Backlight, Lighting |
| HTS Code | 8542.39.00.01 |
| Base Part Number | STAP16 |
| Number of Outputs | 16 |
| Max Output Current | 40mA |
| Max Supply Voltage | 5.5V |
| Output Current | 40mA |
| Max Supply Current | 11mA |
| Max Output Voltage | 20V |
| Voltage - Output | 20V |
| Topology | Shift Register |
| Min Input Voltage | 3V |
| Max Input Voltage | 5.5V |
| Output Current per Channel | 40mA |
| Internal Switch(s) | Yes |
| High Level Output Current | 1mA |
| Low Level Output Current | -1mA |
| Max Input Voltage (DC) | 5.5V |
| Min Input Voltage (DC) | 3V |
| Switching Frequency | 30MHz |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
STAP16DPPS05XTTR Overview
In order to save board space, the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package is used. Typically, LED drivers have 16 outputs.The mounting method is Surface Mount.With high efficiency, it appears as a Linear.It is capable of working normally at -40°C~125°C TJ.Taking advantage of Backlight, Lighting has considerable benefits.In this LED driver, the base is configured as 24.Surface Mount is mounted on it.The base part number for this LED driver is STAP16.There is no maximum value acceptable for the supply voltage, so 5.5V is acceptable.There is 20V voltage output from it.When the input voltage is set to 3V, it operates.The maximum supply current is reached when 5.5V is reached.When the maximum supply current is below 11mA, it is capable of delivering high efficiency.The load is capable of receiving 40mA current.Having the switching frequency at 30MHz enables this electronic component to perform at its best.LED drivers can deliver all benefits of 40mA due to their maximum output current.The output voltage should not be in excess of 20V.
STAP16DPPS05XTTR Features
Available in the 24-TSSOP (0.173, 4.40mm Width) Exposed Pad package
Operating temperature of -40°C~125°C TJ
Switching frequency of 30MHz
STAP16DPPS05XTTR Applications
There are a lot of STMicroelectronics STAP16DPPS05XTTR LED Driver ICs applications.
- Architectural lighting
- Scanners and Handy Terminals
- Flicker-free LED Lighting using R1580N
- OLED power supply for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Gallery lighting
- Amusement Machines
- Constant Voltage Power Source for portable equipment
- Stage Lighting and Signage
- Dimmable LED for vehicle interiors
