STCC2540IQTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 95mOhm |
| Terminal Position | QUAD |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | STCC25 |
| Output Voltage | 5.5V |
| Output Type | N-Channel |
| Max Output Current | 2.8A |
| Supply Voltage-Min (Vsup) | 4.5V |
| Interface | On/Off |
| Number of Ports | 1 |
| Nominal Supply Current | 200nA |
| Output Current | 2.8A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 800 μs |
| Max Output Voltage | 5.5V |
| Switch Type | USB Switch |
| Bandwidth | 1 GHz |
| Turn-Off Delay Time | 300 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 4.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature, Over Voltage, Reverse Current, UVLO |
| Consumer IC Type | CONSUMER CIRCUIT |
| Rds On (Typ) | 65m Ω |
| USB | USB 2.0 |
| Max Junction Temperature (Tj) | 125°C |
| Ambient Temperature Range High | 85°C |
| On-State Resistance | 65mOhm |
| Height | 800μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STCC2540IQTR Overview
Cut Tape (CT) is the way it's packaged.It's included in the 16-WFQFN Exposed Pad package.Surface Mount is the mounting type of the LED driver.It owns the USB Switch switch type.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.With a supply voltage of Not Required, the LED driving board operates.It produces a maximum output voltage of N-Channel volts at its maximum output.It belongs to the family STCC25.It contains 16 terminations.The 16 pins are used for the operation of the system.It is important to note that the LED driving board has 1 functions.Maximum output current falls to 2.8A when operation criteria are met.Surface Mount is mounted in the way of this LED driving board.It has 95mOhm resistance.In this case, the output current will be set to 2.8A.Normal operation requires a voltage above 4.5V for the supply voltage.
STCC2540IQTR Features
Resistance of 95mOhm
STCC2540IQTR Applications
There are a lot of STMicroelectronics STCC2540IQTR Power Switches ICs applications.
- Hot Swaps
- Low Voltage I/O System Power
- Various applications equipped with buttons
- Portable Music Players
- Storage Drives
- Wireless Modem Data Cards
- USB Power Distribution
- Hot Swap
- Set-Top Boxes
- Hot-Swap Systems
