STCF03PNR
| Parameters | |
|---|---|
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | Camera Flash |
| Additional Feature | WITH AUXILIARY LED OUTPUT |
| Subcategory | Display Drivers |
| Max Power Dissipation | 800mW |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.8MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | STCF03 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 800mW |
| Output Current | 800mA |
| Max Supply Current | 1.5mA |
| Voltage - Output | 2.5V~5.3V |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Output Current per Channel | 800mA |
| Current - Output / Channel | 800mA Flash |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 2 |
| Voltage - Supply (Min) | 2.7V |
STCF03PNR Overview
The 20-VFQFN Exposed Pad package saves space on the board. A LED driver with 1 outputs is designed.In order to mount the led light driver, Surface Mount is used.As a DC DC Regulator, it has high efficiency and reliability.It is capable of operating at a temperature of -40°C~85°C TA. There are considerable benefits for Camera Flash.It operates on the basis of the frequency of 1.8MHz.The system operates with a termination of 0.This LED driver is configured with a base of 20 pins.A voltage supply less than 2.7V could result in undetermined failures.There are 2 segments.Surface Mount is mounted on it.It's under the STCF03 base part number.In this case, 5.5V is acceptable.2.5V~5.3V is the output voltage.In this device, there are 20 pins.According to its characteristics, it is also classified into Display Drivers.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 2.7V.As long as the maximum supply current is less than 1.5mA, this device is capable of providing high efficiency.It is possible to supply the load with 800mA current.As a result, this LED driver has a WITH AUXILIARY LED OUTPUT characteristic.
STCF03PNR Features
Available in the 20-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 1.8MHz
Supply voltage of 3.6V
WITH AUXILIARY LED OUTPUT
STCF03PNR Applications
There are a lot of STMicroelectronics STCF03PNR LED Driver ICs applications.
- Linear fluorescent
- White LED Backlight for portable equipment
- A- lamps
- Amusement Machines
- Flicker-free LED Lighting using R1580N
- Down lights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Down lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED Lightings for Industrial Equipment
