STCF03TBR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 25-TFBGA |
| Number of Pins | 25 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 25 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Camera Flash |
| Additional Feature | WITH AUXILIARY LED OUTPUT |
| Subcategory | Display Drivers |
| Max Power Dissipation | 800mW |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 1.8MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STCF03 |
| Pin Count | 25 |
| Number of Outputs | 1 |
| Power Supplies | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 800mW |
| Output Current | 800mA |
| Max Supply Current | 1.5mA |
| Voltage - Output | 2.5V~5.3V |
| Topology | Step-Down (Buck), Step-Up (Boost) |
| Output Current per Channel | 800mA |
| Current - Output / Channel | 800mA Flash |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 2 |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Data Input Mode | SERIAL |
| Height | 860μm |
| Length | 3.1mm |
| Width | 3.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STCF03TBR Overview
25-TFBGA saves board space. A LED driver with 1 outputs is designed.We are using Surface Mount as the mounting method.DC DC Regulator emerges with high efficiency and reliability.It is possible for the led driver ic to operate normally at -40°C~85°C TA.The benefits are considerable for Camera Flash.As a result, it operates based on the frequency of 1.8MHz.For its operation, 25 terminations are designed.The configuration of the board is built around 25 pins.A voltage supply less than 2.7V will cause undetermined failures.It consists of 2 segments.The mount is on its way to Surface Mount.Under the base part number STCF03, you will find this LED driver.The voltage of 5.5V is acceptable.The voltage at the output terminal is 2.5V~5.3V.It is equipped with 25 pin count.Additionally, it can be classified as Display Drivers based on its characteristics.The maximum efficiency standards can be met by operating at the minimal voltage of 2.7V during operation.A minimal supply current is required in order for this device to provide high efficiency.There is no current that can be supplied to the load.Additionally, this LED driver is characterized by a WITH AUXILIARY LED OUTPUT.
STCF03TBR Features
Available in the 25-TFBGA package
Operating temperature of -40°C~85°C TA
Frequency of 1.8MHz
Supply voltage of 3.6V
WITH AUXILIARY LED OUTPUT
STCF03TBR Applications
There are a lot of STMicroelectronics STCF03TBR LED Driver ICs applications.
- LED Lightings for Inspection Devices
- Portable lighting
- Street lighting
- Stage Lighting and Signage
- Architectural lighting
- LED Lightings for Industrial Equipment
- A- lamps
- Stage and Studio lighting
- General lighting
- Museum lighting
