STE10/100A

3.14V~3.46V CMOS 10/100 Base-T/TX PHY PCI Controllers Interface ICs QUAD STE1 128 Pins Controller 0.5mm 128-BFQFP

Manufacturer: STMicroelectronics
Nocochips NO: 761-STE10/100A
Package: 128-BFQFP
Datasheet: PDF
Stock: 163
Description: 3.14V~3.46V CMOS 10/100 Base-T/TX PHY PCI Controllers Interface ICs QUAD STE1 128 Pins Controller 0.5mm 128-BFQFP(Kg)

Details

Tags

Parameters
Mount	Surface Mount
Package / Case	128-BFQFP
Number of Pins	128
Operating Temperature	0°C~70°C
Packaging	Tube
JESD-609 Code	e4
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	128
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
HTS Code	8542.31.00.01
Technology	CMOS
Voltage - Supply	3.14V~3.46V
Terminal Position	QUAD
Terminal Form	GULL WING
Supply Voltage	3.3V
Terminal Pitch	0.5mm
Base Part Number	STE1
Function	Controller
Operating Supply Voltage	3.3V
Power Supplies	5V
Interface	PCI
Clock Frequency	25MHz
Current - Supply	130mA
Data Rate	100 Mbps
Address Bus Width	32
Protocol	Ethernet
Boundary Scan	NO
Low Power Mode	YES
External Data Bus Width	32
Number of Serial I/Os	1
Standards	10/100 Base-T/TX PHY
Bus Compatibility	PCI
Data Transfer Rate-Max	12.5 MBps
Data Encoding/Decoding Method	NRZ; NRZI; BIPH-LEVEL(MANCHESTER)
Height Seated (Max)	3.4mm
Length	20mm
Width	14mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

STE10/100A Overview

It is available in the 128-BFQFP package. With its Tube-shaped packaging, it's easy to carry. A temperature of 0°C~70°C should be maintained for reliable operation. If you use a 3.14V~3.46VV power supply, you should have no problem. In it, there are terminations that end in 128. The supply voltage 3.3V allows for high efficiency. This number is part of the STE1 family. Using 128 pins, the device operates. A device that runs at 25MHz frequency will have a clock that runs at that frequency. For maximum efficiency, the supply voltage should be set to 3.3V. There is currently a 130mA supply available. There is a power supply set to 5V for the component that is being used. Integrated serial 1 I/Os are provided by the part.