STG3159DTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Resistance | 1.1Ohm |
| Terminal Finish | TIN |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.12W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | STG3159 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Max Supply Voltage | 4.5V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 50nA |
| Power Dissipation | 1.12W |
| Max Supply Current | 50nA |
| Turn On Delay Time | 23 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 21 ns |
| -3db Bandwidth | 150MHz |
| On-State Resistance (Max) | 1.1Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 80 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 6pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 23ns, 21ns |
| Charge Injection | 33pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -80dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~4.3V |
| Height Seated (Max) | 0.55mm |
| RoHS Status | ROHS3 Compliant |
STG3159DTR Overview
The electronic part can be shipped overseas conveniently because it is packaged in 6-UFDFN. High reliability is ensured by the advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. 2:1 is the ratio of multiplexer to demultiplexer circuits. Operating temperature around -55°C~125°C TA extended. In total, 6 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 1.8V, it should be turned on and run. 6 pins are injected to the electronic part body. Multiplexers built on a SPDT switching circuit are built. Try searching with STG3159 to find analog multiplexer variants. Internally, this switch multiplexer has a resistance of 1.1Ohm. For functions related to 6 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. Users should never supply a voltage higher than 4.5V to a switch device. Digital switch that provides Single power at a cost-effective price. 1.65V is the lowest voltage that should be fed to the electronic electronic part. The switch device would be able to operate with 50nA current. An analogue multiplexer drains from a single voltage supply at 1.65V~4.3V. A digital multiplexer may suffer damage if voltage is applied above 50nA. A 1 input needs to be operated. There are 2 outputs on the analogue multiplexer.
STG3159DTR Features
1 Channels
Switch Circuit: SPDT
50nA Supply Current
-3db Bandwidth: 150MHz
STG3159DTR Applications
There are a lot of STMicroelectronics STG3159DTR Analog Switches & Multiplexers ICs applications.
- Relay Replacement
- Cable PC
- High-Voltage
- Channelized and Unchannelized DS3 applications
- Data switching
- Industrial
- Audio and video switching
- New designs requiring multiplexer functions
- Medical Instrumentation
- Private Branch Exchange (PBX)
