STG3684AUTR

55ns, 30ns SPDT 500mOhm QUAD Analog Switches BREAK-BEFORE-MAKE STG3684 10 Pins 20nA 2.3V 10-UFQFN

Manufacturer: STMicroelectronics
Nocochips NO: 761-STG3684AUTR
Package: 10-UFQFN
Datasheet: PDF
Stock: 747
Description: 55ns, 30ns SPDT 500mOhm QUAD Analog Switches BREAK-BEFORE-MAKE STG3684 10 Pins 20nA 2.3V 10-UFQFN(Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 7 months ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-UFQFN
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
ECCN Code	EAR99
Resistance	500mOhm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.12W
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.3V
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	STG3684
Pin Count	10
Number of Outputs	4
Operating Supply Voltage	3V
Polarity	Non-Inverting
Number of Channels	1
Max Supply Voltage	4.3V
Min Supply Voltage	1.65V
Operating Supply Current	50nA
Nominal Supply Current	50nA
Power Dissipation	1.12W
Max Supply Current	50nA
Turn On Delay Time	120 ns
Number of Inputs	2
Supply Type	Single
Turn-Off Delay Time	45 ns
-3db Bandwidth	55MHz
On-State Resistance (Max)	500mOhm
High Level Output Current	300mA
Low Level Output Current	300mA
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	66 dB
Current - Leakage (IS(off)) (Max)	20nA
Channel Capacitance (CS(off), CD(off))	5pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	55ns, 30ns
Charge Injection	49pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-72dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	85ns
Switch-off Time-Max	30ns
Voltage - Supply, Single (V+)	1.65V~4.3V
Drain to Source Resistance	500mOhm
Height Seated (Max)	0.55mm
Length	1.8mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

STG3684AUTR Overview

The electrical component comes in 10-UFQFN packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. 2:1 is the ratio between multiplexers and demultiplexers. Increasing operating temperature to around -40°C~85°C TA. A total of 10 terminations have been recorded. The electronic part provides high-quality output because it has 1 channels. Powered by a 2.3V voltage supply, the electrical part should be switched on and run. An injection of 10 pins is performed into the body of the electrical component. On the other hand, analog switches can be constructed using SPDT switching circuits. Search with STG3684 if you are looking for analog multiplexer variants. In this multiplexer, the internal resistance is 500mOhm. The datasheets for the 10 pins explain the functions. This switch device is a typical Multiplexer or Switches. A voltage higher than 4.3V should not normally be supplied to the switches. An effective Single supply digital multiplexer. 1.65V should be the lowest voltage fed to the electronic component. The switch device would be able to operate with 50nA current. A voltage of 1.65V~4.3V is required for this switch device, which drains from a single voltage source. A voltage higher than 50nA may cause damage to the switch multiplexer. Operating voltages range from 3V. There are 2 inputs to be operated. This electronic component presents a Drain to Source resistance of 500mOhm. There are 4 outputs on the analogue multiplexer.