STG3693QTR
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.12W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STG3693 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Number of Channels | 1 |
| Max Supply Voltage | 4.3V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 100nA |
| Nominal Supply Current | 200nA |
| Power Dissipation | 1.12W |
| Max Supply Current | 100nA |
| Turn On Delay Time | 31 ns |
| Number of Inputs | 4 |
| Supply Type | Single |
| Bandwidth | 800MHz |
| Turn-Off Delay Time | 6 ns |
| On-State Resistance (Max) | 5.2Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 79 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 0.3Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 15ns, 5ns |
| Charge Injection | 5pC |
| Channel-to-Channel Matching (ΔRon) | 300m Ω |
| Crosstalk | -78dB @ 1MHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~4.3V |
| Height Seated (Max) | 0.55mm |
| Length | 2.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 5.2Ohm |
STG3693QTR Overview
Packed in 16-UFQFN Exposed Pad, the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. 2:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature extended to -55°C~125°C TA. In total, there have been 16 terminations. By its 1 channels, the electronic component provides high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. Multiplexers built on a SPDT switching circuit are built. Using the STG3693 search parameter, you can discover variants of the switch. The internal resistance of this digital multiplexer is 5.2Ohm. Datasheets for 16 pin functions are available upon request. A analogue multiplexer of this type is a Multiplexer or Switches. Multiplexers should not be powered above 4.3V in normal situations. Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 1.65V. 100nA current would be enough for this multiplexer to operate. This analog switch requires a voltage of 1.65V~4.3V to drain from a single voltage supply. Put voltage above 100nA on the multiplexer to cause damage. In order to operate the 4 inputs, there are several steps to follow. A 800MHz-bandwidth can be used for data transfer. A analog switch ics with 8 outputs is included.
STG3693QTR Features
1 Channels
Switch Circuit: SPDT
100nA Supply Current
Bandwidth: 800MHz
STG3693QTR Applications
There are a lot of STMicroelectronics STG3693QTR Analog Switches & Multiplexers ICs applications.
- Industrial
- Industrial control systems
- Precision data acquisition
- Mechanical reed relay replacement
- PDH Multiplexers
- Routers
- SDH/SONET multiplexers
- Industrial and process control systems
- Microwave transmission systems
- Microprocessor Controlled Analog Systems
