STG3699AUTR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-UFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 450mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | 2-CHANNEL MUX/DEMUX |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.12W |
| Technology | CMOS |
| Terminal Position | QUAD |
| Number of Functions | 4 |
| Supply Voltage | 2.7V |
| Base Part Number | STG3699 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Number of Channels | 4 |
| Max Supply Voltage | 4.3V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 50nA |
| Power Dissipation | 1.12W |
| Max Supply Current | 50nA |
| Turn On Delay Time | 120 ns |
| Supply Type | Single |
| Turn-Off Delay Time | 30 ns |
| -3db Bandwidth | 50MHz |
| On-State Resistance (Max) | 450mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 64 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 55ns, 30ns |
| Charge Injection | 35pC |
| Channel-to-Channel Matching (ΔRon) | 60m Ω |
| Crosstalk | -54dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 55ns |
| Voltage - Supply, Single (V+) | 1.65V~4.3V |
| Height Seated (Max) | 0.6mm |
| Length | 2.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STG3699AUTR Overview
Shipping overseas is convenient with the electronic component packed in 16-UFQFN Exposed Pad. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have a ratio of 2:1. Around -55°C~125°C TA is the extended operating temperature. The total number of terminations is 16. Due to its 4 channels, the electrical component produces high-quality output. A 2.7V voltage supply should turn on and run the electronic component. It is injected into the electrical part body with 16 pins. Multiplexers built on a SPDT switching circuit are built. STG3699 can be used to search for analog multiplexer variants. The internal resistance of this digital multiplexer is 450mOhm. For functions related to 16 pins, please refer to the datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. It is generally not recommended to supply a voltage higher than 4.3V to the switch device in normal circumstances. Digital switch that provides Single power at a cost-effective price. There should be 1.65V voltage fed to the electrical part below 1.65V. For this digital switch to work, 50nA current would suffice. A voltage of 1.65V~4.3V is required to drain this analog switch from a single voltage supply. When the digital multiplexer is charged above 50nA, damage can occur. Don’t miss additional features of the electronic component such as: 2-CHANNEL MUX/DEMUX. A analog switch ics with 8 outputs is included.
STG3699AUTR Features
4 Channels
Switch Circuit: SPDT
50nA Supply Current
-3db Bandwidth: 50MHz
Additional Features: 2-CHANNEL MUX/DEMUX
STG3699AUTR Applications
There are a lot of STMicroelectronics STG3699AUTR Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- Cable PC
- Wireless Local Loop
- Digital access cross connects
- USB 1.1 signal switching circuits
- Remote Powered Equipment
- Switching Systems
- Optical Applications
- Isolation
- Battery Powered Instruments
