STG4159BJR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 7-WFBGA, FCBGA |
| Number of Pins | 7 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 7 |
| Resistance | 300mOhm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | STG4159 |
| Pin Count | 7 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 4.8V |
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 50nA |
| Power Dissipation | 500mW |
| Max Supply Current | 50nA |
| Turn On Delay Time | 38 ns |
| Number of Inputs | 1 |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 17 ns |
| -3db Bandwidth | 28MHz |
| On-State Resistance (Max) | 300mOhm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 69 dB |
| Current - Leakage (IS(off)) (Max) | 30nA |
| Channel Capacitance (CS(off), CD(off)) | 30pF |
| On-state Resistance Match-Nom | 0.005Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 38ns, 17ns |
| Charge Injection | 140pC |
| Channel-to-Channel Matching (ΔRon) | 3m Ω |
| Crosstalk | -69dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~4.8V |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STG4159BJR Overview
The electronic component is convenient to ship overseas because it is packed in a 7-WFBGA, FCBGA. High reliability is ensured by the advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. 2:1 is the ratio between multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 7. High-quality output is provided by the electronic component's 1 channels. When the electronic component is given a voltage of 1.8V, it should be turned on and run. This electrical component is included in the 7 series of products. SPDT switching circuits are used in these analog switch ics. Try searching for the analog switch ic with STG4159 if you are looking for variants. There is 300mOhm internal resistance in this digital multiplexer. Please refer to the datasheets for 7 pins functions. In this analog multiplexer, the value is Multiplexer or Switches. normally, users should not supply switches with voltages higher than 4.8V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 1.65V. This multiplexer would work with 50nA current. This analogue multiplexer requires a voltage of 1.65V~4.8V when it drains from a single voltage supply. Put voltage above 50nA on the multiplexer to cause damage. Among the inputs that can be operated are the 1 inputs. This digital multiplexer has 2 outputs.
STG4159BJR Features
1 Channels
Switch Circuit: SPDT
50nA Supply Current
-3db Bandwidth: 28MHz
STG4159BJR Applications
There are a lot of STMicroelectronics STG4159BJR Analog Switches & Multiplexers ICs applications.
- PBXs
- DSUs
- Medical systems
- E1 Network Equipment
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Video signal routing
- ISDN NT1/TA
- Audio/video switches
- HDTV
- Relay Replacement
