STG5123DTR
| Parameters | |
|---|---|
| Min Supply Voltage | 1.65V |
| Operating Supply Current | 50nA |
| Nominal Supply Current | 50nA |
| Power Dissipation | 1.12W |
| Max Supply Current | 100nA |
| Turn On Delay Time | 40 ns |
| Number of Inputs | 1 |
| Supply Type | Single |
| Turn-Off Delay Time | 29 ns |
| -3db Bandwidth | 150MHz |
| On-State Resistance (Max) | 1.2Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 75 dB |
| Current - Leakage (IS(off)) (Max) | 20nA |
| Channel Capacitance (CS(off), CD(off)) | 25pF |
| On-state Resistance Match-Nom | 0.06Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 28ns, 21ns |
| Charge Injection | 33pC |
| Channel-to-Channel Matching (ΔRon) | 50m Ω |
| Crosstalk | -80dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Voltage - Supply, Single (V+) | 1.65V~4.5V |
| Height Seated (Max) | 0.55mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Resistance | 1.2Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 1.12W |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.4mm |
| Base Part Number | STG5123 |
| Pin Count | 6 |
| Number of Outputs | 2 |
| Number of Channels | 1 |
| Max Supply Voltage | 4.5V |
STG5123DTR Overview
Packed in 6-UFDFN, the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. In the multiplexer and demultiplexer, 2:1 represents the number of circuits. Temperatures around -40°C~85°C TA are extended for operation. The total number of terminations is 6. A 1 channel electronic part produces high-quality output. In the case of a voltage supply of 1.8V volts, the electrical part can be powered up and run. A key feature of the 6 series is the inclusion of this electronic part as part of its design. Based on SPDT switching circuits, these analog multiplexers work. Try searching with STG5123 if you're looking for variants. This digital multiplexer has 1.2Ohm internal resistance. Datasheets for 6 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 4.5V should not normally be supplied to the switches. A analog switch ic that has a cost-effective Single supply type. 1.65V is the lowest voltage the electrical component should receive. 50nA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 1.65V~4.5V. Putting voltage greater than 100nA on the multiplexer may cause damage. The 1 inputs need to be operated in order to work. A analog switch ics with 2 outputs is included.
STG5123DTR Features
1 Channels
Switch Circuit: SPDT
50nA Supply Current
-3db Bandwidth: 150MHz
STG5123DTR Applications
There are a lot of STMicroelectronics STG5123DTR Analog Switches & Multiplexers ICs applications.
- Communication systems
- Cross Connects
- Isolation
- Industrial and process control systems
- Medical Instrumentation
- Audio signal routing
- Sample hold systems
- Signal routing between systems
- Sample-and-hold systems
- ATM
