STK672-070-E
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 15-SIP Formed Leads |
| Number of Pins | 12 |
| Operating Temperature | 150°C TJ |
| Packaging | Bulk |
| Published | 2003 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 15 |
| Terminal Finish | Tin/Nickel/Copper (Sn/Ni/Cu) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES IN 10 TO 45 SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | SINGLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2mm |
| JESD-30 Code | R-XSFM-T15 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 400mV |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Nominal Supply Current | 14mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 6.5W |
| Logic Function | AND |
| Output Current-Max | 2A |
| Collector Emitter Voltage (VCEO) | 45V |
| Max Collector Current | 1.7A |
| Voltage - Load | 10V~45V |
| Switching Frequency | 47kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8, 1/16 |
| Height | 25.5mm |
| Length | 46.6mm |
| Width | 8.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
STK672-070-E Overview
Drivers controllers is designed with Bulk package.The part is packaged in a 15-SIP Formed Leads case.Mounting the part by Through Holeis recommended.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.There is a capability for the device to provide 4.75V~5.25V volts.A range of 150°C TJis available for operating temperature.A total of 15terminations are available in this part.You can apply voltage at 10V~45Vto the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.Its recommended mounting way is Through Hole.12pins are available on the device.Drivers controllers belongs to the series [0].A voltage of 400mVis maintained at the output.As a result, we can recognize that the motor type is Stepper.In addition to this, it is also characterized by ALSO OPERATES IN 10 TO 45 SUPPLY.
STK672-070-E Features
Applications : General Purpose
Load voltage across the chip 10V~45V
Motor Type classified as Stepper
Additional Feature: ALSO OPERATES IN 10 TO 45 SUPPLY
STK672-070-E Applications
There are a lot of ON Semiconductor STK672-070-E motor drivers applications.
- Camcorders
- A cross between entertainment
- Landscape lighting
- RGB and monochromatic LED drivers for signage and traffic signals
- PWM generators
- Human-centric lighting
- Mobile phone display backlight and key light driving
- General lighting
- Home lighting systems
- Alternative to HID lights
