STK672-330-E
| Parameters | |
|---|---|
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | SINGLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2mm |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Current - Output | 1.8A |
| Logic Function | AND |
| Voltage - Load | 10V~42V |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2 |
| Height Seated (Max) | 29.1mm |
| Length | 29.5mm |
| Width | 3.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 12-SIP |
| Number of Pins | 12 |
| Operating Temperature | 0°C~105°C TC |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e2 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Terminal Finish | Tin/Nickel/Copper (Sn/Ni/Cu) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES WITH THE RANGE OF 10V TO 42V SUPPLY |
STK672-330-E Overview
The design contains a Tubepackage.The part is packged with 12-SIP case.In general, it is recommended that the part be mounted by Through Hole.I believe it is suitable for the component connected to General Purpose.The device can supply 4.75V~5.25V volts.A range of 0°C~105°C TCis available for operating temperature.There are 12 terminations available on this part.Voltage can be applied at a rate of 10V~42V volts to the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.The recommended way to mount it is Through Hole.The output current should be kept at 1.8A for the part.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.12pins are available on the device.There is also a characteristic ALSO OPERATES WITH THE RANGE OF 10V TO 42V SUPPLYassociated with it.
STK672-330-E Features
Applications : General Purpose
Load voltage across the chip 10V~42V
Additional Feature: ALSO OPERATES WITH THE RANGE OF 10V TO 42V SUPPLY
STK672-330-E Applications
There are a lot of ON Semiconductor STK672-330-E motor drivers applications.
- Hazardous application
- Arena lighting
- Brake lights
- Horticultural lighting
- A cross between entertainment
- Smart lighting applications
- High brightness LED lighting
- Tunnel lights
- Charge pump circuits
- Indicator
