STK672-400C-E
| Parameters | |
|---|---|
| Lifecycle Status | LIFETIME (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | 150°C TJ |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES IN 10 TO 45 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Terminal Pitch | 1mm |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Current - Output | 2A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 15mA |
| Voltage - Load | 10V~45V |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8, 1/16 |
| Height Seated (Max) | 18.2mm |
| Length | 29.2mm |
| Width | 4.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
STK672-400C-E Overview
The package contains [0].The part is packged with 19-SSIP Formed Leads case.Drivers controllers is recommended that the part be mounted by Through Hole.Fits the component connected to General Purpose.In this case, the device can supply 4.75V~5.25V volts.Operation temperature ranges from 150°C TJ.This part offers 19terminations.Drivers controllers is possible to apply voltage at a rate of 10V~45Vto the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.Through Holeis the recommended mounting method.Maintain a current of 2Afor the part output.The device employs the STEPPER MOTOR CONTROLLER analog IC.A device with 19pins is available.Drivers controllers is part of the series [0].Also, it is characterized by a ALSO OPERATES IN 10 TO 45 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM.
STK672-400C-E Features
Applications : General Purpose
Load voltage across the chip 10V~45V
Additional Feature: ALSO OPERATES IN 10 TO 45 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
STK672-400C-E Applications
There are a lot of ON Semiconductor STK672-400C-E motor drivers applications.
- RGB and monochromatic LED drivers for signage and traffic signals
- Automotive exterior and interior lighting
- High brightness LED lighting
- Hidden coves in high-end residential settings
- PWM generators
- Mobile phone display backlight and key light driving
- Human-centric lighting
- Smart lighting applications
- Running preventive- maintenance diagnostics
- Digital still cameras
