STK672-410C-E
| Parameters | |
|---|---|
| Lifecycle Status | LIFETIME (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | 150°C TJ |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES IN 10 TO 45 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Terminal Pitch | 1mm |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (2) |
| Current - Output | 3A |
| Logic Function | AND |
| Supply Current-Max (Isup) | 15mA |
| Voltage - Load | 10V~45V |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8, 1/16 |
| Height Seated (Max) | 18.2mm |
| Length | 29.2mm |
| Width | 4.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
STK672-410C-E Overview
There is a Tubepackage included in the design.The part is packged with 19-SSIP Formed Leads case.In general, it is recommended that the part be mounted by Through Hole.As a result, it is appropriate for the component connected to General Purpose.Drivers controllers is capable of supplying 4.75V~5.25V volts.Regarding the operating temperature, it is in the range of 150°C TJ°C.The part supports 19terminations.In this case, the voltage can be applied to the load at the rate of 10V~45V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.In terms of mounting, it is recommended that it be mounted in Through Hole.Drivers controllers is recommended to keep the part output current at 3A.The device employs the STEPPER MOTOR CONTROLLER analog IC.Drivers controllers is designed wDrivers controllersh 19 pins.Drivers controllers belongs to the series [0].There is also a characteristic ALSO OPERATES IN 10 TO 45 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOMassociated with it.
STK672-410C-E Features
Applications : General Purpose
Load voltage across the chip 10V~45V
Additional Feature: ALSO OPERATES IN 10 TO 45 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
STK672-410C-E Applications
There are a lot of ON Semiconductor STK672-410C-E motor drivers applications.
- Commercial office
- Brake lights
- Lighting for health and wellbeing
- Hazardous application
- Indicator circuit
- Multiple output capability
- AM radio
- Digital still cameras
- Scanning equipment
- Tunnel lights
