STK672-430A-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | 0°C~105°C TC |
| Packaging | Tape & Box (TB) |
| Published | 2013 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Base Part Number | STK672 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 7mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 7.3W |
| Current - Output | 2A |
| Voltage - Load | 10V~42V |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8, 1/16 |
| Length | 29.2mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
STK672-430A-E Overview
This package was designed with Tape & Box (TB)in mind.This part is packed in a 19-SSIP Formed Leads case.Mounting the part by Through Holeis recommended.For the component connected to [0], it is suitable.This device is capable of supplying voltages up to 4.75V~5.25V volts.Operation temperature ranges from 0°C~105°C TC.This part offers 19terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.This amplifier should be operated at 5V.A Through Holemounting method is recommended for this product.Drivers controllers is recommended to keep the part output current at 2A.A STEPPER MOTOR CONTROLLERanalog integrated circuit is employed in this device.Drivers controllers is based on the STK672 part number.19pins are present on the device.The Motion Control Electronicsseries contains it.There are a total of 1outputs available.
STK672-430A-E Features
Applications : General Purpose
Load voltage across the chip 10V~42V
base on STK672 number
designed with 1 outputs
STK672-430A-E Applications
There are a lot of ON Semiconductor STK672-430A-E motor drivers applications.
- Horticultural applications
- PWM generators
- Mobile phone display backlight and key light driving
- Indicator circuit
- Automotive instrumentation
- Hazardous application
- High power LED street light
- Hospitality buildings
- A cross between entertainment
- Home lighting systems
