STK672-432A-E
| Parameters | |
|---|---|
| Max Collector Current | 2A |
| Voltage - Load | 10V~42V |
| Switching Frequency | 48kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8, 1/16 |
| Height | 14.4mm |
| Length | 24.2mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | 0°C~105°C TC |
| Packaging | Tape & Box (TB) |
| Published | 2009 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Base Part Number | STK672 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Nominal Supply Current | 7mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 7.3W |
| Collector Emitter Voltage (VCEO) | 42V |
STK672-432A-E Overview
This package is designed to work with [0].This part is packed in a 19-SSIP Formed Leads case.To mount the part by [0], it is recommended that you do so.I believe it would be suitable for the component connected to General Purpose.The device can supply 4.75V~5.25V volts.In terms of operating temperature, it falls within the range 0°C~105°C TC.There are 19 terminations available in the part.You can apply voltage at 10V~42Vto the load.In order to get the best performance from this amplifier, it should be run at 5V.Ideally, it should be mounted in the Through Holeposition.STK672is the part number that finds it.19pins are available on the device.The item belongs to the Motion Control Electronics series.There are 1 outputs available.As a result, we can recognize that the motor type is Stepper.
STK672-432A-E Features
Applications : General Purpose
Load voltage across the chip 10V~42V
base on STK672 number
designed with 1 outputs
Motor Type classified as Stepper
STK672-432A-E Applications
There are a lot of ON Semiconductor STK672-432A-E motor drivers applications.
- Monitoring the energy that the luminaire uses
- Fog lamps
- Hazardous application
- drivers for outdoor application
- High brightness LED lighting
- Tunnel lights
- Brake lights
- AM radio
- LCD displays
- Arena lighting
