STK672-440A-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | 0°C~105°C TC |
| Packaging | Tape & Box (TB) |
| Published | 2013 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Base Part Number | STK672 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 5.7mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 8.3W |
| Output Current-Max | 20A |
| Collector Emitter Voltage (VCEO) | 42V |
| Max Collector Current | 3A |
| Voltage - Load | 10V~42V |
| Switching Frequency | 48kHz |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8, 1/16 |
| Height | 14.4mm |
| Length | 29.2mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
STK672-440A-E Overview
This package is designed to work with [0].The part is packged with 19-SSIP Formed Leads case.Drivers controllers is recommended to mount the part by Through Hole.As a result, it is appropriate for the component connected to General Purpose.In this case, the device can supply 4.75V~5.25V volts.The operating temperature ranges from 0°C~105°C TCto 0°C~105°C TC.The part has 19terminations available.You can apply voltage at 10V~42Vto the load.Drivers controllers is important to note that this amplifier should be operated at the 5Vsetting.The recommended way to mount it is Through Hole.The device employs the STEPPER MOTOR CONTROLLER analog IC.This can be determined by looking at the STK672 part number.This device is designed with a pin count of 19.Drivers controllers is a part of the Motion Control Electronics series.The available outputs are [0].
STK672-440A-E Features
Applications : General Purpose
Load voltage across the chip 10V~42V
base on STK672 number
designed with 1 outputs
STK672-440A-E Applications
There are a lot of ON Semiconductor STK672-440A-E motor drivers applications.
- CHMSL (center high-mount stop lamps)
- LCD displays
- Indicator
- General lighting
- Brake lights
- Mobile phone display backlight and key light driving
- Camcorders
- Lighting for health and wellbeing
- A cross between entertainment
- Home lighting systems
