STK672-440BN-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | 0°C~105°C TC |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Max Power Dissipation | 8.3W |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Terminal Pitch | 1mm |
| Frequency | 50kHz |
| Base Part Number | STK672 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Operating Supply Current | 8.5mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 3A |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 46V |
| Max Collector Current | 3.5A |
| Voltage - Load | 0V~46V |
| Switching Frequency | 48kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8, 1/16 |
| Height | 14.4mm |
| Length | 29.2mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STK672-440BN-E Overview
This package is designed to work with [0].The part is packged with 19-SSIP Formed Leads case.To mount the part by [0], it is recommended that you do so.This component is suitable for the component connected to General Purpose.There is a capability for the device to provide 4.75V~5.25V volts.A range of 0°C~105°C TCis available for operating temperature.There are 19 terminations available on this part.Drivers controllers is possible to apply voltage to the load at the rate of 0V~46V.In order to get the best performance from this amplifier, it should be run at 5V.Its recommended mounting way is Through Hole.The output current should be kept at 3A for the part.STK672is the part number that finds it.There are 19 pins on it.The number of outputs available is [0].Drivers controllers is possible to recognize Stepperas the type of motor.For its operation, a supply current of 8.5mAis used.Controller ic is possible to reach a frequency of 50kHz.
STK672-440BN-E Features
Applications : General Purpose
Load voltage across the chip 0V~46V
base on STK672 number
designed with 2 outputs
Motor Type classified as Stepper
STK672-440BN-E Applications
There are a lot of ON Semiconductor STK672-440BN-E motor drivers applications.
- Running preventive- maintenance diagnostics
- Fog lamps
- High power LED street light
- Camcorders
- Emergency lighting
- Tunnel lights
- Smart lighting applications
- Automotive exterior and interior lighting
- Step-up or step-down driver topologies
- A cross between entertainment
