STK672-442BN-E
| Parameters | |
|---|---|
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Frequency | 50kHz |
| Base Part Number | STK672 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Operating Supply Current | 8.5mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 3A |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 50V |
| Max Collector Current | 3.5A |
| Voltage - Load | 0V~46V |
| Switching Frequency | 48kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2, 1/4, 1/8, 1/16 |
| Height | 14.4mm |
| Length | 24.2mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | 0°C~105°C TC |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES IN 0 TO 46V SUPPLY |
| Max Power Dissipation | 8.3W |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
STK672-442BN-E Overview
There is a Tubepackage included in the design.A 19-SSIP Formed Leadscase is included with the part.To mount the part by [0], it is recommended that you do so.The component connected in General Purposeis compatible with it.The device can supply 4.75V~5.25V volts.The operating temperature ranges from 0°C~105°C TCto 0°C~105°C TC.This part has 19termination options.Voltage can be applied at a rate of 0V~46V volts to the load.Drivers controllers is recommended that this amplifier be run at 5V.The recommended way to mount it is Through Hole.Maintain a current of 3A for the part output.Using the STK672part number, it is located.This device is designed with a pin count of 19.Drivers controllers is possible to access 2outputs.Steppercan be recognized as a motor type.Controller ic has also been assigned the characteristic [0].Controller ic operates wController ich a supply current of 8.5mA.Controller ic is possible to achieve a frequency of 50kHz.
STK672-442BN-E Features
Applications : General Purpose
Load voltage across the chip 0V~46V
base on STK672 number
designed with 2 outputs
Motor Type classified as Stepper
Additional Feature: ALSO OPERATES IN 0 TO 46V SUPPLY
STK672-442BN-E Applications
There are a lot of ON Semiconductor STK672-442BN-E motor drivers applications.
- Outdoor area lights
- Automotive applications
- Home lighting systems
- Mobile phone display backlight and key light driving
- Monitoring the energy that the luminaire uses
- Tail lights
- AM radio
- Indicator circuit
- Tunnel lights
- Large format LED backlighting
