STK672-533-E
| Parameters | |
|---|---|
| Lifecycle Status | LIFETIME (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 12-SIP Formed Leads |
| Number of Pins | 12 |
| Operating Temperature | 0°C~105°C TC |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES IN 10 TO 42 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | SINGLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2mm |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 42V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 7mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 10.2W |
| Current - Output | 2.2A |
| Logic Function | AND |
| Voltage - Load | 10V~42V |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2 |
| Height Seated (Max) | 27mm |
| Length | 32.5mm |
| Width | 8.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
STK672-533-E Overview
There is a Tubepackage included in the design.Drivers controllers comes in a 12-SIP Formed Leads case.Drivers controllers is recommended to mount the part by Through Hole.For the component connected to [0], it is suitable.A device with a voltage range of 4.75V~5.25V volts is available.A range of 0°C~105°C TCis available for operating temperature.A total of 12terminations are available in this part.There is the option of applying the voltage to the load at the rate of 10V~42V.You should run this amplifier at 5V.A Through Holemounting method is recommended for this product.Set the part's output current to 2.2A.This device utilizes the STEPPER MOTOR CONTROLLERanalog integrated circuit.The device has 12 pins.Drivers controllers is a part of the Motion Control Electronics series.A supply voltage of 42Vis required to operate this driver.A characteristic ALSO OPERATES IN 10 TO 42 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOMis also associated with it.
STK672-533-E Features
Applications : General Purpose
Load voltage across the chip 10V~42V
Additional Feature: ALSO OPERATES IN 10 TO 42 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
STK672-533-E Applications
There are a lot of ON Semiconductor STK672-533-E motor drivers applications.
- Commercial office
- Hospitality buildings
- Lighting for the ambience of tunability
- Street lights
- Outdoor area lights
- Automotive exterior and interior lighting
- Infotainment backlighting
- Tunnel lights
- Digital still cameras
- Alternative to HID lights
