STK672-630AN-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | 0°C~105°C TC |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Terminal Pitch | 1mm |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Output Configuration | Half Bridge (2) |
| Logic Function | AND |
| Output Current-Max | 10A |
| Collector Emitter Voltage (VCEO) | 42V |
| Max Collector Current | 2.2A |
| Voltage - Load | 0V~42V |
| Switching Frequency | 45kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2 |
| Height | 4.5mm |
| Length | 29.2mm |
| Width | 14.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STK672-630AN-E Overview
Drivers controllers is designed with Tube package.A 19-SSIP Formed Leadscase is included with the part.In general, it is recommended that the part be mounted by Through Hole.The component connected in General Purposematches it perfectly.This device is capable of supplying voltages up to 4.75V~5.25V volts.In terms of operating temperature, it falls within the range 0°C~105°C TC.There are 19 terminations available in the part.The voltage can applied to the load at the rate of 0V~42V.Drivers controllers is important to remember that this amplifier should be run at 5V.Ideally, it should be mounted in the Through Holeposition.The device has 19 pins.The available outputs are [0].The motor type can be recognized as Stepper.
STK672-630AN-E Features
Applications : General Purpose
Load voltage across the chip 0V~42V
designed with 2 outputs
Motor Type classified as Stepper
STK672-630AN-E Applications
There are a lot of ON Semiconductor STK672-630AN-E motor drivers applications.
- Step-up or step-down driver topologies
- Dome
- Street lights
- Indicator circuit
- Landscape lighting
- High power LED street light
- LED ballasts
- Horticultural lighting
- Camcorders
- General lighting
