STK672-630C-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | -20°C~105°C TC |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES IN 0 TO 46 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Terminal Pitch | 1mm |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Output Voltage | 500mV |
| Operating Supply Voltage | 46V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 8mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 7.3W |
| Current - Output | 2.2A |
| Logic Function | AND |
| Voltage - Load | 0V~46V |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2 |
| Height Seated (Max) | 18.2mm |
| Length | 29.2mm |
| Width | 4.5mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
STK672-630C-E Overview
Drivers controllers is designed wDrivers controllersh a package of [0].There is 19-SSIP Formed Leads case included with the part.Mounting the part by Through Holeis recommended.The component connected in General Purposeis compatible with it.In this case, the device can supply 4.75V~5.25V volts.Drivers controllers operates wDrivers controllershin a range of -20°C~105°C TCdegrees Celsius.A total of 19terminations are available in the part.At a rate of [0], voltage can be applied to the load.Drivers controllers is important to note that this amplifier should be operated at the 5Vsetting.There is a recommended mounting method of Through Hole.Maintain a current of 2.2Afor the part output.A STEPPER MOTOR CONTROLLERanalog integrated circuit is used in the device.In this device, there are 19 pins.Drivers controllers belongs to the Motion Control Electronics series.The supply voltage for this driver is 46V.The output voltage is maintained at 500mV.Also, it is characterized by a ALSO OPERATES IN 0 TO 46 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM.
STK672-630C-E Features
Applications : General Purpose
Load voltage across the chip 0V~46V
Additional Feature: ALSO OPERATES IN 0 TO 46 SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
STK672-630C-E Applications
There are a lot of ON Semiconductor STK672-630C-E motor drivers applications.
- PWM generators
- Turn signals
- Matrix LED dimmers
- Infotainment backlighting
- Industrial lighting
- Running preventive- maintenance diagnostics
- Automotive instrumentation
- Daytime running lights (DRLs)
- Home lighting systems
- Building technology
