STK672-642A-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | 0°C~105°C TC |
| Packaging | Tape & Box (TB) |
| Published | 2013 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Base Part Number | STK672 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Operating Supply Voltage | 42V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 8mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 8.3W |
| Current - Output | 3.3A |
| Voltage - Load | 10V~42V |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2 |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
STK672-642A-E Overview
This package is designed to work with [0].This part is packaged with a case of [0].Mounting the part by Through Holeis recommended.As a result, it is appropriate for the component connected to General Purpose.The device can supply 4.75V~5.25V volts.With regard to operating temperature, it ranges 0°C~105°C TC. This part provides 19terminations.At a rate of [0], voltage can be applied to the load.You should run this amplifier at 5V.Through Holeis the recommended mounting method.The output current should be kept at 3.3A for the part.There is an analog integrated circuit STEPPER MOTOR CONTROLLERpresent in the device.As a result of the STK672part number, it can be found.A device with 19pins is available.Drivers controllers belongs to the series [0].1outputs are available in total.A supply voltage of 42V is required for the operation of this driver.
STK672-642A-E Features
Applications : General Purpose
Load voltage across the chip 10V~42V
base on STK672 number
designed with 1 outputs
STK672-642A-E Applications
There are a lot of ON Semiconductor STK672-642A-E motor drivers applications.
- Indicator circuit
- Digital still cameras
- Multiple output capability
- High power LED street light
- Emergency lighting
- Commercial office
- Alternative to HID lights
- Indicator
- Smart lighting applications
- Infotainment backlighting
