STK672-732AN-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | 0°C~105°C TC |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Max Power Dissipation | 7.3W |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Frequency | 50kHz |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Operating Supply Current | 4.4mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 2.2A |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 42V |
| Max Collector Current | 2A |
| Voltage - Load | 0V~42V |
| Switching Frequency | 45kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2 |
| Height | 4.5mm |
| Length | 29.2mm |
| Width | 14.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STK672-732AN-E Overview
The package contains [0].Parts are packaged in 19-SSIP Formed Leadscases.Mounting the part by Through Holeis recommended.I believe it would be suitable for the component connected to General Purpose.4.75V~5.25V volts can be supplied by the device.This device operates at a temperature range of 0°C~105°C TC.In this part, there are 19 terminations available.The voltage can applied to the load at the rate of 0V~42V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.A Through Holemounting method is recommended for this product.Maintain the current output of the part at 2.2A volts.Drivers controllers is designed wDrivers controllersh 19 pins.There are a total of 2outputs available.Drivers controllers is possible to recognize Stepperas the type of motor.4.4mAis the supply current used for its operation.In this case, 50kHzis the maximum frequency that can be achieved.
STK672-732AN-E Features
Applications : General Purpose
Load voltage across the chip 0V~42V
designed with 2 outputs
Motor Type classified as Stepper
STK672-732AN-E Applications
There are a lot of ON Semiconductor STK672-732AN-E motor drivers applications.
- Charge pump circuits
- Monitoring the energy that the luminaire uses
- High brightness LED lighting
- Automotive applications
- Street lights
- A cross between entertainment
- Step-up or step-down driver topologies
- Industrial high-bay lights
- Scanning equipment
- Footwell lighting
