STK672-732B-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Operating Temperature | -20°C~105°C TC |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e2 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES IN 0 TO 46V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Terminal Pitch | 1mm |
| JESD-30 Code | R-XZFM-T19 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Output Voltage | 500mV |
| Operating Supply Voltage | 46V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 8mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 7.3W |
| Current - Output | 2.2A |
| Logic Function | AND |
| Voltage - Load | 0V~46V |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2 |
| RoHS Status | RoHS Compliant |
STK672-732B-E Overview
The design includes a package of type [0].Drivers controllers comes in a 19-SSIP Formed Leads case.Drivers controllers is recommended that the part be mounted by Through Hole.I believe it would be suitable for the component connected to General Purpose.There is a possibility of providing 4.75V~5.25Vvolts through the device.There is a temperature range of -20°C~105°C TCin which this device operates.A total of 19terminations are available in the part.In this case, the voltage can be applied to the load at the rate of 0V~46V.The amplifier should be set to 5V.The recommended way to mount it is Through Hole.Keep the part output current at 2.2A.An analog IC with the model number STEPPER MOTOR CONTROLLERis employed in the device.Drivers controllers belongs to the Motion Control Electronics series.A supply voltage of 46Vis required to operate this driver.In this case, 500mVis maintained as the output voltage.Drivers controllers also has a characteristic of [0].
STK672-732B-E Features
Applications : General Purpose
Load voltage across the chip 0V~46V
Additional Feature: ALSO OPERATES IN 0 TO 46V SUPPLY
STK672-732B-E Applications
There are a lot of ON Semiconductor STK672-732B-E motor drivers applications.
- Arena lighting
- LED ballasts
- Accurate LED current matching
- High power LED street light
- parking lights
- Indicator
- Side marker lights
- Tail lights
- drivers for outdoor application
- Footwell lighting
