STK672-740B-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | -20°C~105°C TC |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e2 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES IN 0 TO 46V SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM |
| HTS Code | 8542.39.00.01 |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Terminal Pitch | 1mm |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 500mV |
| Operating Supply Voltage | 46V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 8mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 8.3W |
| Current - Output | 3.3A |
| Logic Function | AND |
| Voltage - Load | 0V~46V |
| Motor Type - Stepper | Unipolar |
| Step Resolution | 1, 1/2 |
| Height Seated (Max) | 18.2mm |
| Length | 29.2mm |
| Width | 4.5mm |
| RoHS Status | RoHS Compliant |
STK672-740B-E Overview
There is a Tubepackage included in the design.19-SSIP Formed Leadscases are included with the part.A mounting position of Through Holeis recommended for the part.I believe it is suitable for the component connected to General Purpose.This device is capable of supplying voltages up to 4.75V~5.25V volts.This device operates at a temperature range of -20°C~105°C TC.In this part, there are 19 terminations available.At a rate of [0], voltage can be applied to the load.In order to get the best performance from this amplifier, it should be run at 5V.The recommended way to mount it is Through Hole.Maintain a current of 3.3Afor the part output.A STEPPER MOTOR CONTROLLERanalog integrated circuit is used in the device.Drivers controllers is designed wDrivers controllersh 19 pins.Drivers controllers operates from a voltage of 46V volts.Drivers controllers is maintained at 500mV volts.The characteristic of ALSO OPERATES IN 0 TO 46V SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOMis also present.
STK672-740B-E Features
Applications : General Purpose
Load voltage across the chip 0V~46V
Additional Feature: ALSO OPERATES IN 0 TO 46V SUPPLY, SEATED HT-CALCULATED, SEATED HGT-NOM
STK672-740B-E Applications
There are a lot of ON Semiconductor STK672-740B-E motor drivers applications.
- Running preventive- maintenance diagnostics
- Arena lighting
- Camera-enabled smartphones
- AM radio
- Dome
- Tail lights
- High brightness LED lighting
- Fog lamps
- RGB and monochromatic LED drivers for signage and traffic signals
- Large format LED backlighting
