STK673-011-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 28-SIP |
| Number of Pins | 28 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Bulk |
| Published | 2013 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Tin/Nickel/Copper (Sn/Ni/Cu) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | SINGLE |
| Supply Voltage | 5V |
| Base Part Number | STK673 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Nominal Supply Current | 12mA |
| Output Configuration | Half Bridge (3) |
| Output Current-Max | 4A |
| Collector Emitter Voltage (VCEO) | 30V |
| Max Collector Current | 2.4A |
| Voltage - Load | 16V~30V |
| Motor Type | Stepper |
| Motor Type - Stepper | Multiphase |
| Step Resolution | 1, 1/2, 1/4, 1/8 |
| Height | 32mm |
| Length | 64mm |
| Width | 8.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
STK673-011-E Overview
This package was designed with Bulkin mind.The part is packaged in a 28-SIP case.The part should be mounted by Through Hole.For the component connected to [0], it is suitable.The device is capable of supplying a voltage of 4.75V~5.25V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.There are 28 terminations available in the part.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is important to remember that this amplifier should be run at 5V.Through Holeis the recommended mounting method.As a result of the STK673part number, it can be found.28pins are present on the device.Drivers controllers belongs to the series [0].There are 1 outputs available.0 indicates that the motor type is [0].
STK673-011-E Features
Applications : General Purpose
Load voltage across the chip 16V~30V
base on STK673 number
designed with 1 outputs
Motor Type classified as Stepper
STK673-011-E Applications
There are a lot of ON Semiconductor STK673-011-E motor drivers applications.
- Large format LED backlighting
- Digital still cameras
- Alternative to HID lights
- Tail lights
- Infotainment backlighting
- Industrial lighting
- RGB and monochromatic LED drivers for signage and traffic signals
- Emergency lighting
- Human-centric lighting
- PDAs
