STK681-200-E
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 12-SIP, 11 Leads |
| Number of Pins | 12 |
| Operating Temperature | 150°C TJ |
| Packaging | Bulk |
| Published | 2008 |
| JESD-609 Code | e2 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| Terminal Finish | Tin/Nickel/Copper (Sn/Ni/Cu) |
| Applications | DC Motors, General Purpose |
| Additional Feature | ALSO OPERATES WITH THE RANGE OF 10V TO 42V SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET, IGBT |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | SINGLE |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2mm |
| Operating Supply Voltage | 42V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Logic |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 2.7mA |
| Output Configuration | Half Bridge (2) |
| Output Current | 4.2A |
| Output Current per Channel | 4.2A |
| Supply Current-Max (Isup) | 6mA |
| Voltage - Load | 10V~42V |
| Load Type | Inductive |
| Height Seated (Max) | 29.1mm |
| Length | 29.5mm |
| Width | 3.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
STK681-200-E Overview
To package H bridge, use Bulk.H bridge is provided in the 12-SIP, 11 Leads package for the sake of cost savings.Bridge driver is possible to improve the reliabilbridge drivery of 4.75V~5.25V by increasing the supply voltage.H bridge circuit is mounted in the way of Through Hole.150°C TJ is able to function normally at motor driver H bridges operating temperature.A number of applications can be made use of H bridge motor driver, including DC Motors, General Purpose.Mount the board using Through Hole.A transmission line can be terminated at a 12 termination with the H bridge whose characteristic impedance matches the transmission line.Signal interfaces use 12 pins as pronged contacts.H bridge circuit operates with the supply voltage of 5V.H bridge circuit has been incorporated with BRUSH DC MOTOR CONTROLLER as its analog IC type.The output pins and the power supply pins are conducting 4.2A current.This H bridge motor driver falls under the subcategory of Motion Control Electronics. It is similar to other parts within that category.In order to maintain a high level of efficiency, the operating supply voltage is maintained at 42V.524V supplies electrical power to the load.Additionally, ALSO OPERATES WITH THE RANGE OF 10V TO 42V SUPPLY can be provided.
STK681-200-E Features
Available in 12-SIP, 11 Leads Package / Case
Operating Temperature at the range of Through Hole
Number of Receivers: 42V
With ALSO OPERATES WITH THE RANGE OF 10V TO 42V SUPPLY Drivers
STK681-200-E Applications
There are a lot of ON Semiconductor STK681-200-E Full Bridge Drivers, Half-Bridge Drivers applications.
- Voltage Regulators for CPUs
- Networking Microprocessor Voltage Regulators
- Home Appliances
- Voltage Regulators for GPUs
- Telecom Microprocessor
- OA equipments
- Industrial Fans
- Voltage Regulators
- Industrial Pumps
- Optical disc drives
