STK681-332-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | -20°C~105°C TC |
| Packaging | Bulk |
| Published | 2011 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 5V |
| Base Part Number | STK681 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 42V |
| Max Output Current | 12A |
| Operating Supply Voltage | 5.25V |
| Power Supplies | 524V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Nominal Supply Current | 6mA |
| Output Configuration | Half Bridge (2) |
| Power Dissipation | 2.8W |
| Supply Current-Max (Isup) | 9mA |
| Collector Emitter Voltage (VCEO) | 42V |
| Max Collector Current | 6.1A |
| Voltage - Load | 10V~42V |
| Switching Frequency | 46kHz |
| Motor Type - AC, DC | Brushed DC |
| Height | 14.4mm |
| Length | 24.2mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STK681-332-E Overview
There is a Bulkpackage included in the design.This part is packaged with a case of [0].The part should be mounted by Through Hole.This component is suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 4.75V~5.25V volts.This device operates at a temperature of -20°C~105°C TC.Drivers controllers is possible to classify the motor type as Brushed DC.There are 19 terminations available in the part.The voltage can applied to the load at the rate of 10V~42V.The amplifier should be set to 5V.A Through Holemounting method is recommended for this product.This device utilizes the BRUSH DC MOTOR CONTROLLERanalog integrated circuit.According to the STK681part number, the part is found.Drivers controllers is designed wDrivers controllersh 19 pins.The item belongs to the Motion Control Electronics series.Drivers controllers is possible to access 1outputs.There is 5.25V supply voltage required for this driver.A constant voltage is maintained at 42V.For the purposes of meeting its operation requirements, the maximum output current reaches [0].
STK681-332-E Features
Applications : General Purpose
Load voltage across the chip 10V~42V
base on STK681 number
designed with 1 outputs
STK681-332-E Applications
There are a lot of ON Semiconductor STK681-332-E motor drivers applications.
- Monitoring the energy that the luminaire uses
- A cross between entertainment
- Street lights
- Hospitality buildings
- parking lights
- LCD displays
- Large format LED backlighting
- Daytime running lights (DRLs)
- Commercial office
- CHMSL (center high-mount stop lamps)
