STK681-360-E
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 19-SSIP Formed Leads |
| Number of Pins | 19 |
| Operating Temperature | 0°C~105°C TC |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e2 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 19 |
| Terminal Finish | Tin/Nickel (Sn/Ni) |
| Applications | General Purpose |
| Additional Feature | SEATED HT-CALCULATED |
| Max Power Dissipation | 3.1W |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | ZIG-ZAG |
| Supply Voltage | 24V |
| Terminal Pitch | 1mm |
| Frequency | 20kHz |
| Base Part Number | STK681 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 2 |
| Supply Voltage-Min (Vsup) | 10V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Operating Supply Current | 3.5mA |
| Output Configuration | Half Bridge (2) |
| Current - Output | 4.5A |
| Logic Function | AND |
| Collector Emitter Voltage (VCEO) | 30V |
| Max Collector Current | 3A |
| Voltage - Load | 10V~30V |
| Switching Frequency | 20kHz |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Height | 14.4mm |
| Length | 29.2mm |
| Width | 4.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STK681-360-E Overview
The design contains a Tubepackage.Drivers controllers is packaged wDrivers controllersh a 19-SSIP Formed Leads case.Ideally, the part should be mounted by Through Hole.As a result, it is appropriate for the component connected to General Purpose.There is a possibility of providing 4.75V~5.25Vvolts through the device.In terms of operating temperature, it falls within the range 0°C~105°C TC.In this case, the motor type is Brushed DC.The part supports 19terminations.If the voltage is applied to the load at the rate of [0], the load will be affected.Drivers controllers is important to note that this amplifier should be operated at the 24Vsetting.Through Holeis its recommended mounting method.Maintain a 4.5Aoutput current for the part.A BRUSH DC MOTOR CONTROLLERanalog IC is employed in this device.The part number STK681indicates that it is found.There are 19 pins on it.The number of outputs available is [0].The motor type can be recognized as Brushed.Drivers controllers is also characterized by SEATED HT-CALCULATED.This device operates on 3.5mAsupply current.In this case, the frequency is 20kHz.
STK681-360-E Features
Applications : General Purpose
Load voltage across the chip 10V~30V
base on STK681 number
designed with 2 outputs
Motor Type classified as Brushed
Additional Feature: SEATED HT-CALCULATED
STK681-360-E Applications
There are a lot of ON Semiconductor STK681-360-E motor drivers applications.
- Hospitality buildings
- Lighting for health and wellbeing
- Horticultural applications
- Large format LED backlighting
- Lighting for the ambience of tunability
- CHMSL (center high-mount stop lamps)
- Telltale lights
- Running preventive- maintenance diagnostics
- Footwell lighting
- Hidden coves in high-end residential settings
