STM1061N19WX6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM1061 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 3.6μA |
| Nominal Supply Current | 3.6μA |
| Power Dissipation | 320mW |
| Max Supply Current | 3.6μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 1.9V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 30μs Typical Propagation Delay |
| Min Reset Threshold Voltage | 1.862V |
| Max Reset Threshold Voltage | 1.938V |
| Threshold Voltage | +1.9V |
| Undervoltage Threshold | 1.862V |
| Overvoltage Threshold | 1.938V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
STM1061N19WX6F Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. Power management is packaged in a Tape & Reel (TR) way. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. Please find attached TO-236-3, SC-59, SOT-23-3 functions for your reference in this IC power. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. There is a specification for the peak reflow temperature of the package to be 260. When 1 is applied to the power ic, it conducts. Surface Mount mounts power management on the wall. A IC power such as this can be classified as a Power Management Circuits power management system. The total number of pins on this power management is 3. There are 3 pins on the supervisor. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 700mV, which is the minimum supply voltage that should be applied. There should be no more than 6V volts of maximum supply voltage (Vsup) in this power management. Power management recommends the Surface Mount mounting type. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Open Drain or Open Collector. For this power management, there is an 3.6μA volt supply current. A similar IC managements number of the manufacturer can always be found by using STM1061, the base power ics number. The maximum supply temperature voltage supervisor can handle is 3.6μA.
STM1061N19WX6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
STM1061N19WX6F Applications
There are a lot of STMicroelectronics STM1061N19WX6F Voltage Supervisors applications.
- Sensitive sensors
- Detection of phase loss
- Computer applications
- Network equipment
- FPGA design
- Data storage applications
- Microprocessor system
- Fire equipment power monitoring system
- DC stabilized power supply module
- DVR
