STM1061N22WX6F
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-236-3, SC-59, SOT-23-3 |
| Number of Pins | 3 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 3 |
| ECCN Code | EAR99 |
| Type | Simple Reset/Power-On Reset |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Power Management Circuits |
| Max Power Dissipation | 320mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.96mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | STM1061 |
| Output | Open Drain or Open Collector |
| Pin Count | 3 |
| Number of Channels | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 700mV |
| Operating Supply Current | 3.6μA |
| Nominal Supply Current | 3.6μA |
| Power Dissipation | 320mW |
| Max Supply Current | 3.6μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active Low |
| Voltage - Threshold | 2.2V |
| Number of Voltages Monitored | 1 |
| Reset Timeout | 30μs Typical Propagation Delay |
| Min Reset Threshold Voltage | 2.156V |
| Max Reset Threshold Voltage | 2.244V |
| Threshold Voltage | +2.2V |
| Undervoltage Threshold | 2.156V |
| Overvoltage Threshold | 2.244V |
| Height | 1.02mm |
| Length | 3.04mm |
| Width | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
STM1061N22WX6F Overview
A total of 3 terminals are used to mount this power management. Tape & Reel (TR)-packaging is used. In this PMIC, you can find 1 functions for your reference. Depending on the power managment ic you are looking at, you can find a total of 1 channels. To assist you, this PMIC includes TO-236-3, SC-59, SOT-23-3 functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. According to the specification, the package's peak reflow temperature is specified to be 260. IC management is possible to find a succession of 1 voltages that have been checked. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, the power management has 3 pins in it. 3 pins are present on the power management system. There should be a minimum voltage supply (Vsup) of 700mV for this PMIC. The maximum supply voltage (Vsup) is not to exceed 6V volts in this IC management. Mounting type Surface Mount is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. There is an output voltage of Open Drain or Open Collector from this supervisor when it is operating. For this power management, there is an 3.6μA volt supply current. It is always advisable to use STM1061, the base supervisor number, when searching for similar PMICs from the manufacturer. The power management can work with a maximum supply temperature of 3.6μA.
STM1061N22WX6F Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 700mV
3.6μA operating supply current
STM1061N22WX6F Applications
There are a lot of STMicroelectronics STM1061N22WX6F Voltage Supervisors applications.
- Satellite navigation
- FPGA design
- Power communication system
- Rechargeable batteries
- Battery-powered equipment
- Functional modules
- Leakage protection
- Data storage applications
- Detection of phase imbalance
- Medical-specific isolation transformer
